The Round Six Podcast
A weekly round table discussion, featuring a variety of automotive subjects, interviews, special guests and stories, hosted by the Round Six Gearheads.
Mon, December 20, 2021
Topless In Pomona: A Radio Comedy Play
A COMEDIC ADVENTURE PLAYED IN THE THEATER OF THE MIND The Gearheads got together one day a threw down a radio play. Why? It just made sense in the "we like to do what no one else can" kinda way. And it was fun, really. The whole thing began when Brian just wouldn't shut up about his love for the old radio shows... the adventure stories, the comedies, even the dramas. That was the golden age of entertainment; the stuff right before the motion pictures and television shows took over. The sort of entertainment that relied on your imagination. Theater of the mind, as it were. Just like reading a book... Or, more in keeping with recent times, like listening to an audio book. That said... Welcome to the first in a new series. GLORIOUS THESPIAN AURAL The story is pretty straight-forward. The characters are kept to a minimum, and the whole thing was penned in one sitting. Brian slapped the thing together, and then he and Steve plugged in a few jokes, tweaked a few lines, and Brad, Brian and Steve banged it out. Steve has an amazing array of voices and characters to draw upon, and Brian lives to over-act... So the whole thing was destined to fall together like a whipped cream pie meeting a clown's face. It always pays to write about what you know, and to write comedy about that which you love. Or may not love so much. In fact, you can glean some great content by simply going balls-out after the things that annoy you. And this sketch, well, really hits on something that annoys the gang. ALL THE WORLD'S A STAGE ...and a joke, really. You just need to know where to look for the punchline. Bear in mind that this is one part love letter to the hobby, and one part a tongue-firmly-in-cheek absurdist comedy. It's not a personal attack on anyone, nor is it some thinly-veiled anything. It's just a wacky adventure that never really starts on any rails. We hope that you enjoy listening to it as much as we enjoyed putting it together. The Credits: Created by: Brian Stupski Written by: Brian Stupski Edited by: Brian Stupski and Steve Hayes Directed by: Brian Stupski Produced by: Brad King, Brian Stupski and Steve Hayes Engineer: Brad King Sound Effects by: Brad King Final Mix by: Brad King Narrated by: Brad King The Hunter: Brian Stupski Internal Monologue: Steve Hayes Internal Monologue Twice-Removed: Brian Stupski Strip Club Bouncer: Steve Hayes Strip Club PA Announcements: Brad King, Brian Stupski, Steve Hayes Strippers: Brad King, Steve Hayes Lowrider Vision Quest Shaman: Steve Hayes Appalachian Extra: Brian Stupski The Ghost of Borge Garrish: Steve Hayes Don J'Septembertino: Steve Hayes TraditionalGateKeeper32: Steve Hayes HAMB Mook:Brad Kin
Wed, September 16, 2020
The State of the Hobby Roundtable
The Gearheads hosted a roundtable of a different sort, discussing the state of the hobby at the 71st Grand National Roadster Show. We arranged a cast of builders, owner/clients and builder/owners to talk about where the hobby is at, where it's going, and what the stakes are with regard to quality and chasing perfection. This episode is an amazing look into competing at AMBR/Slonaker/Ridler levels from nearly every perspective. We invited Erik Hansen, who has owned high-profile cars (including "Sedeuced," the 1932 Ford which was featured on the TV show Rides , season one, episode ten ) to provide his perspective as a client. We also invited builder and prior guest Tim Strange , and builder/sometimes self-client JF Launier to provide the builder perspective on the state of the hobby, and what goes into putting a car together at the upper level. It is an interesting and entertaining look inside of the relationship between client, designer and builder, and a fascinating peek behind the curtain of competing for the top awards. THINGS COVERED IN THIS EPISODE: Some VERY coincidental events and overlaps Speaking Canadian fluently The client/builder relationship – The builder/client relationship An insider's look at the time investment from a client's perspective The client/designer/builder dynamic – Mention of "the wife dynamic" Perception of quality – Private sale VS auction sale – Passion from all parties involved as opposed to screen time on TV The builder's "whole life investment" in a build – Re-mortgaging multiple family properties to complete a build Selling a concept to a client Hinting at a project The amassed knowledge of a career VS billable hours – Building a car in the real world as compared to a television budget The reality of automotive reality television – 3800 man hours in 30 hours of TV – A team of skilled industry professionals working nonstop versus three buddies eating pizza and watching NASCAR – The push at the end/building the right team Logistics of a high-end client build Hot rod flashcards – Ben Franklin's non-Presidency that should have been... seriously The Al Slonaker Memorial Award (best non-roadster) revamp – The Detroit VS Pomona thing – The lessening of the importance of the big award in Detroit Competing at the highest level – Best car in the world compared to the best car to show up that day <
Fri, September 11, 2020
It's a Supercharged Brunchtime
"HE'S TEARING THIS THING APART LIKE HE'S AT PICK-N-PULL." The Gearheads sit down with long-time friend David Engle of Engle Brothers Fabrication to talk brunchtime. Namely a brunch that didn't happen, really. Without giving too much away (you'll have to tune in on Amazon Prime Video this Friday, April 3, 2020 and watch the new episode of Stories N' Steel ), it involved a secret overhaul of Brian's Challenger. Calling in friends from all over, some of whom made the cross-country trek to be a part (like Tim Strange ), the gang pulled a supercharged surprise. From Hotchkis Sport Suspension to a Magnuson supercharger, Baer six-piston brakes, Toyo tires, a carbon fiber Speedkore spoiler and custom badges from Alumicraft Street Rod Grilles , it was an ambitious one-day project to say the least. It even got its own t-shirt, featuring artwork by Round Six's Del Swanson . You can grab your very own RIGHT HERE . You can get inside of Brian's head (don't say that we didn't warn you) by reading his take on the day HERE . THINGS COVERED IN THIS EPISODE: The backstory What it takes to arrange a build like this... and keep it secret Keeping an industry secret from an industry insider The logistics Personal loss – A death in the family Getting the car to Dino's without Brian knowing, but having him drive it there Turning Brian's son into a gearhead The amazing group of friends that we have Learning all about Challengers Industry icons working and having fun Bringing back passion lost The Phoenix Valley One-n-Done tradition <l
Fri, February 21, 2020
Hot Rod Ambassadors: Jason and Mike
GLOBAL HOT ROD AMBASSADORS The Gearheads sit down with hot rod ambassadors Jason Rushforth and Mike Keller (of Big Creek Restorations in Kansas) in The Round Six Experience at the 2020 Grand National Roadster Show and discuss the 2019 Riyadh Auto Salon in Saudi Arabia. You've read the opinions of many who weren't there on social media, now here's the inside scoop from two industry professionals who were there. Jason and Mike discuss local sights, sounds, culture and more. Learn all about the event, and what it's like to be one of the first tourists in Saudi Arabia. It's a fascinating look at the worldwide automotive culture, and how cars are always the great equalizer. Our extreme gratitude to Jay an Mike for sharing their experiences and time with us. This is a fun episode that offers a great look into the international scene from a very personal perspective. We hope you enjoy it as much as we did. You can read more about Jay's trip HERE , and see a few photos as well. THINGS COVERED IN THIS EPISODE: Brian gets all joke-y The ARP Lounge and Bob Florine's influence on a great GNRS Passion for cars Working relationships in the hot rod world The Riyadh Auto Salon – Spousal support for international travel – Heading blindly into an international trip The mainstream media misconception about Americans in the Middle East – Feeling more than welcome by the Saudi people – Wandering Riyadh in off-show hours – The incredible logistics involved The "orphan" hotel – "3-4 leisurely omelettes" Watching Pulp Fiction in Saudi Arabia Exploring Riyadh, all self guided-like Learning culture on the fly The local car scene Cars and Coffee at Tim Horton's Fifty-five pounds of boost into a straight six Nissan! Hot rodding is universal The GM B-body revolution is alive! The REAL story on the "missing" cars – Dispelling the internet theories on dirty and damaged cars Cornering a badger The King's Cup camel race Brian pulls "ambrosia" – Jay christens a custom car Staring a falcon in the eye The lack of Citat
Fri, February 07, 2020
A Supercharged Episode from GNRS
A SUPERCHARGED GNRS EPISODE The Gearheads sit down with Erin and Dustin Helm of Magnuson Superchargers for a, well, supercharged discussion. Talk goes deep into careers in the aftermarket, the value of networking and a covert-ops mission worthy of a television show. Episode seventy-three dives headlong into some fun topics, as well as laying the groundwork for anyone looking to get a foot in the door of the High-Performance Automotive Aftermarket Parts industry. Of course, Erin and the team at Magnuson Superchargers were tremendously instrumental in making Project Emanon come together, for which "thanks" just doesn't seem enough. We touch on that project, the covert ops behind it, and how it all came to be. Dustin gives some background to his career as a fabricator, and explains his path to working with one of the premier brands in the industry... And how it all began with Marine Biology. We have fascinating guests, and they always bring a great story! And if this weren't enough for you, we dive deep into the mechanics of a couple who work together, and how that all adds to the relationship. We're a lot more like Oprah than Dr. Phil in this one. It's a value-added episode in terms of pursuing a career in the industry, and we cannot thank Erin and Dustin enough for their insight, candor and great advice for our listeners hoping to pursue their aspirations. THINGS COVERED IN THIS EPISODE: The blown elephant in the room Brian becomes the mark Brad does a big thing Dave Engle is always the connection The power of networking (and shooting for the moon) The computer unlock/Petty's Garage connection When your kid goes rogue Alex's first supercharger imstall The drama-free build day Things go Predatorial The Engles stop by! A reunion of sorts Supercharger talk/welcome to the boosted life A foot in the door in the industry – Working your way up – Getting a job via networking From Nanny to Sales Assistant – The value of adaptability when transitioning positions within the company A day in the life of a Marketing Coordinator R&D Fabricator via Marine Biology – From Wyo-Tech to Magnuson – The importance of an education – The crossovers in job duties – Tech school as a stepping stone to a career SCUBA diving when you can't swim "Superchargers? I want turbos!" Married life meets Working life – A balance of career and passionsa<b
Sun, December 08, 2019
Jason Rushforth: What's in a Name?
"IT ALL STARTED IN AN EL CAMINO." The Gearheads sit down with designer and artist Jason Rushforth... finally. One of the marquee names in the industry when it comes to design, boutique wheel brands and just an all-around nice guy, it's a twisting and turning bunch of topics. Episode seventy-two gets right into it with a discussion about the recent Riyadh Auto Salon in Saudi Arabia. Jason was fortunate to be one of the hot rod industry ambassadors who attended the event, and we talk logistics, the local scene and more. From humble beginnings as a BMX-obsessed kid to providing design guidance to some serious players in the business, Jason Rushforth is an inspiring, forward-thinking trendsetter whose designs are instantly recognizable anywhere. THINGS COVERED IN THIS EPISODE: The Saudi Arabia experience – Six months from genesis to event – A year's worth of work in months – OSHA violations on parade – The logistics of importing 450 cars from around the world Brian offers a car club name A discussion of Middle Eastern daily life and traffic – Alex shares his memories – Honking out of courtesy VS anger The Saudi hot rod scene – LS-swapped GM B-bodies! – Not just a bunch of rich guys with exotic cars The difference between social media posturing and having to make a name prior to it Getting that first magazine feature Building a career – Having builders/magazines mention a designer's name in an article A discussion on design Humility and making a name Jason's Buick The Porsche 928 – Brad prefers his Porsche Pro-Streeted Coming up in the shadow of the greats like Steve Stanford Once again, it all starts with BMX bikes – Getting back into it later in life –Soaring prices of vintage BMX bikes Best/Worst conception story of all time
Wed, November 27, 2019
Stories N' Steel: New Series Debuts
"STORIES N' STEEL IS A CAR SHOW ABOUT PEOPLE." Our all-new series, Stories N' Steel drops this Black Friday (November 28, 2019) on Amazon Prime Video. The Gearheads sit down to discuss the show, what it's about, where to view it, and most importantly how it all ties together with the podcast. Stories N' Steel is a car show about people. That means no fake drama, no made-up deadlines or other nonsense... Just the stories from the hot rod builders, collectors and craftsmen who lived them. Stories N' Steel is like the podcast; it's one part conversation, one part storytelling, and all parts laid-back benchrace session. If you've ever wanted to get to know the whole story of some of the nation's top builders, then you're going to love what Stories N' Steel brings each week. Hosted by our own Brad King , episode one takes you deep into the history of Squeeg's Kustoms with Doug Jerger . If you've ever wanted to know what it takes to run one of the top hot rod shops in the country, or what it's like to win the AMBR on accident, or even how to pinstripe all no-hands like, well, you'll like where this is all going. THINGS COVERED IN THIS EPISODE: The genesis of the show How the podcast came to be Tying the podcast and TV series together Why we chose Amazon Prime Video Self-producing a TV series Television creation on a self-funded shoestring A peek behind the scenes Partnering with Auto Revolution What it takes to make this mess work Brad gets a new nickname
Fri, August 23, 2019
Kevin Whipps: We're going to Pavillions!
Brian heads out all solo-like to Squarebody Syndicate World Headquarters and takes a break from another One 'n Done on Joe Yezzi's diesel crew cab to sit and talk with Kevin Whipps. We dive deep into the philosophy of the Arizona community and family, and what makes it unique, and then into the builds that made for a career. It's a laid-back ride through the importance of the people over the vehicles every time. We talk mini trucks, the growth and heyday of the Euro tuner scene in the 1990's and beyond, to the influence of Courtney Hallowell on his and future generations and more. THINGS COVERED IN THIS EPISODE: Writing books on air suspension and C-10 restoration The longevity of a Rochester carburetor rebuild guide book Brian pitches more book ideas Kevin's other book concepts A discussion on the death of the patina trend – Another coffee table book Dino pops in Early influences How enjoying the process of a build inspires a career path The Daihatsu Charade The Toyota pickup The Civic! – Covers of Import Racer and Lowrider Euro Rolling a car right after the photoshoot On getting started writing for magazines "You need to shoot his house" The Dino thing – The Git-Down When the magazines took a break from paying people The C-10 Restoration book The Euro tuner scene in its heyday When mini trucks ruled the world The '72 E-Type Jag that started it all Growth as a person by becoming involved in the scene The Severed Ties years The sheen of nostalgia – "Look at how great my past was" Real nostalgia: "You love it when you're not doing it" Rolling the Civic Tri-Fives as a generational thing The Old Body Style movement The slow death of the patina trend – The good, the bad and the delightfully messed-up – "It looks like Hell parked in someone's garage" The Engles find a way into another episode LS engine talk, 4.8 VS 5.3 VS 6.0L Stripping a six year build in six hours Perspective Courtney Hallowell and a bigger-than-life influence Brian pitches the National Mini Truck Museum
Fri, August 09, 2019
M2 Machines: Passion and Detail with Extra Cool
Sean Taylor, Vice President of Product Development at M2 Machines joins the Gearheads for an evening of laid-back conversation. We talk cool cars, the genesis of M2 Machines, the life of a die cast car company professional, working from home and more. We dig into the current and upcoming M2 Machines offerings, and geek out over the samples we were fortunate to have in hand thanks to Sean... THINGS COVERED IN THIS EPISODE: Bringing little cars to the Big Show Sean hits the road and promotes the M2 brand Weird convention names and chasing windmills Drama in the Toy Car world "We're a niche diecast company" Sean explains the differences in the levels of his toy line The extra effort and research that goes in to create "uniquely optioned" cars Bench seats in a muscle car? Sure! The Hurst Sunshine Camaro Brad anoints Sean as the "Willy Wonka of Toy Cars" Growing up the son of a gearhead Discussing product recalls and navigating through trademarks In search of the Holy Grail: The Foose Hauler (1 of 6!) "Dude, I take my flames super-serious" Always striving to put out the best product every day Research, research, research The challenge and satisfaction of "pet projects" within the company How making limited runs keeps your product collectible and fresh Working with great companies like Walmart Taking a car from design to production Starting out as an artist Sean's first job as an artist......making Yellow Page advertisements Crossing the velvet ropes and entering the inner sanctum at Muscle machines Making so many 1969 Camaro Muscle Machines that they physically broke the mold Sean reveals the most obscure model he's ever done (psst...it's the Fargo!) Brian pitches his "Bullitt Car" toy idea Sean goes crazy working from home The birth of M2 Machines in 2007 Licensing everything just to cover your butt Making Coby's VanGo van Explaining the details of the upcoming Squarebody Syndicate toy <l
Fri, July 26, 2019
On the Wings of an Alex
"THERE'S STILL SOME JUICY LEFT IN THAT FRUIT." On episode sixty-eight, it's all about Alex. And starvation. But mostly Alex. And maybe menopause. And a Magic 8-Ball bowling ball. And soup. And souls and Camaros and angels. ...but mostly Alex. THINGS COVERED IN THIS EPISODE: The Boys get emotional about the plight of starving podcasters Chicken soup for your ears, now with egg noodles! Want to help? Go to Patreon.com/roundsix and decide what level you want Touched by an Angel.....is that such a good thing? Alex complains about always being in the back of the class Brian comes up with a brilliant idea: The bowling ball sized Magic 8-Ball Uncle David and his hot rod influence on Alex Hot Rods in the neighborhood, and being "that kid" Alex's first hot rod, a Schwinn Sting Ray The Hustler, always trying to make money Making the decision to join the Air Force and work on fighter planes Getting out of the Air Force and working on the B-2 Bomber Working at Edwards and being surrounded by incredible aerospace history Alex the historian and statistics buff who can't cheat at Trivial Pursuit The 1969 Camaro road trip and permanent hearing loss Being in the service and always having cool cars Selling one Camaro and buying another Finding out that the '71 Camaro Rally Sport was a very special car Alex talks Camaro paint colors, and how the years have made it easier to accept Hot rods are always the last to get money and attention The guys discuss sunroof ideas for the '71 Camaro The Camaro almost got mini-tubbed and ruined The ghost of Hardly Earl Does this car have a Magnum V8? Making quartz countertops from Quartz Juice The mostly happy and kinda sad story of the 1958 Chevy truck Brian talks about menopause and his secret project involving Ewoks Lynn's Dad's 1968 Camaro RS and her childhood memories The 1968 Camaro project.......Monster Rally or Stadium 'Maro? Starting a new series of building a hot rod by the most frugal means possible. Making $11 bucks the hard way Roadside milk jugs full of "Gatorade" Wilford Brimley joins the show and promotes "Oatmeal Night" Favorite Boy Bands and cowboy forehead bandanas The emotion comes back, thanks to Sarah McLaughlin Round Six discusses their "Chinese Democracy" concept album.
Fri, July 12, 2019
A Triple Gun Award Episode of Near-Excellence
"THAT'S WHY THEY PUT WHEELS ON TOOLBOXES." On episode sixty-seven, we head back in time to January at the 70th Grand National Roadster Show, and a quick session with Darryl Hollenbeck and Zane Cullen . It's a paint all-star spectacular, and the conversation starts with a discussion of the Triple Gun Award of Excellence, and goes outrageously sideways. Great time at a great how with great friends. It's a laid-back look at the industry through the eyes of two seasoned pro's... And three podcast hosts just trying to keep it on the rails. THINGS COVERED IN THIS EPISODE: Stuff we can't air The Triple Gun Award of Excellence – The history of the award – Judging criteria – The three guns, Darryl Hollenbeck, Charlie Hutton and Zane Cullen Mickie Galloway's design contribution Brian launches the idea of bringing the past winners to one display at GNRS – "The Triple Mom Award" Darryl's AMBR win in 2016 Roofies in the booth Multi-generational family businesses – Easing into the industry The recurring BMX theme as the gateway to hot rods Darryl on his Dad – Dad's toolbox – Buying his Dad's old work truck back First cars Many, many paint puns Many, many more nut jokes Paint technology Paint as a crutch – The collision shop atmosphere VS the custom paint shop The barrier between passion and investing time to better your skill set Brian makes the mistake of offering to go deeper On being a hot rod subcontractor Time management "You're easy to squeeze in" "The Foose episode was nothing like this" A Tipper Gore refrence Influences/heroes – Westergard – Bertolucci – Art Himsl – Barris Starting your own business – Efficiency – A process of continuing improvement – Learning the hard lessons
Fri, July 05, 2019
Paint in the 'Blood: Kenny Youngblood
"THE PRINCIPLES OF ART DON'T CHANGE." On episode sixty-six, we're joined by the legendary Kenny Youngblood. An automotive artist of the highest order, his early start in the funny car lettering field is where most will know him from. A man whose professional career has been spent around and working with legendary names like John Buttera and Don Kirby, the stories are practically endless. The Gearheads are joined by Round Six's fourth man, Carson, and his interaction as a young kid with Kenny led to a long career in the industry. Kenny was cool enough to give a kid some lessons, and inspired him to take up the brush. A life-lesson in that example for anyone who sees the spark in the next generation to be sure. Please go and do likewise! Carson went from being a kid hiding in a corner watching, to becoming a skilled sign painter. THINGS COVERED IN THIS EPISODE: Kenny's influence on one of Round Six's own, Carson – Painting cars at Don Kirby's Custom Paint – Carson hanging around as a kid – The Barry Setzer Vega – From Medical School to sign painting Early art influences – Learning as a kid from his artist Mother Hand drawing blueprints Early racing efforts with an injected Hemi-powered dragster Tom Kelly's busy schedule provides an early break for Kenny Creating isometric projection drawings – The "Fudge-O-etric" drawing Early Buttera cars The Bank of Ameri-Car Learning to letter race cars Kenny's business advice: "Raise your prices" Passing work to the guys coming up How to grow your business as an artist The move from hand-painted to digital and vinyl – "I've had things blow up on the burnout!" The golden age of great-looking race cars The Youngblood-style grilles and headlights – The afro pick headlight technique "I could always tell how good an idea was by how often it was stolen" Early funny car names Nostalgia funny cars Pouncing with Butcher paper Carson and Kenny's paths cross once more at Hot Wheels Making the shift from painting on cars to painting cars on canvas Motorsport Fine Art The dawn of the age of motorsport collectibles The Lions Drag Strip Museum
Fri, June 28, 2019
Where a Derelict Becomes an ICON
"I WANT MY STUFF TO BE WHOMPED ON." Here on episode sixty-five, we sit down with ICON 4x4 and TLC founder and CEO Jonathan Ward. It's a laid back, candid look at building cool vehicles in a very technology-driven world. A self-starter in definition as well as practice, Jon's childhood acting days (from a chance shot in Peter Pan to Charles in Charge to a stalker incident) and an interest in restoring old tech and cars lead to starting a business. We explore the passion that drives ICON, the idea behind the brand, and the marketing approach. THINGS COVERED IN THIS EPISODE: Industrial design meets entrepreneurship Raymond Leowy Avoiding the "theme" build while staying true to the vehicle's character Steering clear of bad design directions Crafting a unique aesthetic Creating brand identity Working to make a unique statement without turning down the bread and butter work The balance of loving what you do and loving the customer – When to fire a client Steering the client via renderings Nostalgia as a motivator in building a project The gender difference in styles/needs/wants – Women VS men with regard to needs and wants in a vehicle "Corrupted by the perversions of modernity" – A discussion on tech and obsolescence Being an "old school martyr" – Brian proposes the "Tune-ruining choke knob" feature Changing the mood and personality of a vehicle just through exhaust note A "rockabilly" bar cruiser Hudson Hornet "Build it like you'd keep it" The challenges of working with obscure vehicles – "It's like the dot-com era for hot rodders" Working with technology like 3D printing and composites – The "pucker moment" when you need an impossible-to-find part Watching tech and changing attitudes toward old-school craftsmanship Research and design on the fly Getting stuck in a rut in your craft and not seeing the advantage of pushing forward – Looking forward at nanotech, hydrophobics and more Drawing inspiration from a wide variety of sources Passion builds versus assembly line product Early days of tech scrounging The first resto project: a '55 Ford Meeting Mikhail Baryshnikov – Hitching a ride to a cattle call and landing a role in Peter Pan on Broadway The advantages of not having a board to answer to when working to preserve the passion and DNA of a brand Purity of execution working through a series of compromise
Fri, June 21, 2019
Bob Thrash: Surrounded by Legends
"PUSH THE ENVELOPE TO SEE HOW FAR THE CUSTOMER WILL LET YOU GO." We sit down with Bob Thrash to talk hot rods, a career in the hot rod world, and having worked alongside so many legends. From early influences and opportunities, Bob has always found himself surrounded by an extremely skilled team. It's not often that someone learns among legends almost exclusively, but Bob Thrash is one of those guys. He learned to airbrush with Scott Sullivan. He cut his teeth in the talent-breeding powerhouse that is Rad Rides. He's worked for and among the best in the business, and shares that path with us. Honing the craft on some of the highest-end cars in the world prepares you to go it on your own in a very unique way. We get into that and more here. THINGS COVERED IN THIS EPISODE: Studying the work of those whom you admire Early days in the industry The Scott Sullivan influence – Inspiration found in his Nova at the 1979 Street Machine Nationals – Learning to airbrush with Scott –Todd Clark's Bones Pro-Street Camaro Creativity in graphics Moving from Des Moines back to Chicago Landing a job at Jack's Automotive (which became Rad Rides) The 1950 Buick Bumongous build A 1/4-inch thick steel floor in the garage The early days at Rad Rides by Troy The talent breeding ground that was Rad Rides – Nurturing creativity Leading a creative team in the shop Different cars over the years – Building Ritzow's '32 Ridler builds Ring Brothers build involvement Motor Wheel Flys find their way to the conversation Current projects – The Joe Nichols Pontiac – The Camaro with the Hardy-built LT-4 A discussion of the changes to the Al Slonaker Memorial Award – First-time shown VS showing build photos Ridler-level builds versus road-worthy cars – Working with the mechanical components versus covering everything A discussion of vehicle graphics – Being mentored by... Scott Sullivan – Overcoming fear and just jumping in to do the job – Learning the materials and techniques – Proof of time and practice making perfect – Starting in his 30's, versus a lifelong hobby Brad and Brian's "meeting Bob" stories Selling a creative idea to push a project forward Client blind faith versus vision Brian's failed "glitter bomb" rendering The rising cost of materials – Neat ways to justify tape costs – The balance between the amount of tape
Fri, June 14, 2019
Indianapolis Joe and the Temple of Cool
"HE BOUGHT A LION." The Gearheads sat down with Joe Yezzi of Squarebody Syndicate to talk truck builds, lifestyle branding, making a huge splash at the 2018 SEMA Show and hot-lapping at Indy. If you're into the squarebody GM truck scene, then you know the Squarebody Syndicate brand. What began as a hobby has turned into a serious player in the lifestyle brand scene, and is one of the most recognizable brands in the C-10 community. Joe and Rob Yezzi set the pace, building a killer truck a couple of years back (SS01) that debuted in the Royal Purple booth. This past year, they stepped-up their game and went over the top with their 1976 GMC Indy Tribute, SS02. THINGS COVERED IN THIS EPISODE: Brian jumps right in like a teenager on Prom night The 1976 Indy Tribute truck – A brief history of the build – The road to SEMA Show 2018 Building upon the success of Syndicate Series 01 from 2015 A chance meeting with Doug Boles – The SEMA Indy 500 promise The Indy Truck reveal in the Royal Purple booth The t-shirt model car box – The Round Six connection to Squarebody Syndicate – Logos, renderings and promotional materials – Brian's squarebody therapy adventure Defining "Yezzi Clean" It all declines into a brief shmooze-fest Fusing 1970's hot rod influence with modern technology "What if you hear a gasp when the cover comes off?" Furthering the discussion of sidewall – Judicious use of the word "bulge" – The Gearheads nearly take the high road – It declines with a comparison of Scott Sullivan's bulge Experiments and gambles Joe and Brian research and explore wheels The "Keystone Klassic Convo-Pro" that may have been Covering beautiful custom-milled wheels with wrinkle finish The episode goes all Tarantino The road to Indy – Thirty hours on the road with no plan Hot laps at Indy The Indianapolis 500 VIP experience Genesis of the Squarebody Syndicate brand – Organically turning a hobby to a business – Brian crafts a logo or fifteen From apparel to parts – Dakota Digital gauges – Squarebody Syndicate-branded AccuAir controllers – The Syndicate Series Roadster Shop chassis What's on the horizon – The M2 Machines Squarebody Syndicate lineup –
Fri, June 07, 2019
Design Driven Down Under with Ziggy
"WE HAVE A VERY UNIQUE FLAVOR OF BUILDS." The Gearheads were honored to jump a half day into the future and visit with Ziggy Sadler of Ziggy's Design Driven . Joined by guest host Carson Lev , the talk runs from SEMA involvement on Australia to four-door hot rods and historical race cars. Ziggy Sadler is directly involved with SEMA's push to help develop the Australian aftermarket, and we explore that in some detail. Talk naturally turns to Carson's passion for the Jocko streamliner, and this kicks a number of fun doors open. The gang explores racing history, a number of delicately-interconnected events and people, and even hatches a plan to tour the car in America once again. From humble, early days of sneaking into car shows, Ziggy parlayed that love for cars into a career. Eventually traveling to America in the late-1980's, his exposure to builders like Boyd Coddington and Troy Trepanier and Chip Foose, he set a benchmark for the work to come out of Ziggy's Design Driven. THINGS COVERED IN THIS EPISODE: The wonder of time travel Australian passion for hot rodding SEMA's involvement with the Australian market The deal with four-door vehicles The Commodore market Differences between Australian and American cars – Floor pan depth differences – Midsize track and wheelbase differences – Brian explores the exponential price differences in selling twice as many billet hinges and door handles – Trimming a four-door versus a coupe Asbestos removal on imported project cars Brian pitches The DelaHyundai , a pontoon-fendered Sonata swan song SEMA AUSTRALIA, THE AFTERMARKET AND BEYOND The shortages in the Australian aftermarket, personnel-wise An exploration of import tariffs – The fifty-percent hike in price just in taxes The high level of fabrication skill abroad Working with what you have versus importing parts The "imprinting" of vehicles leading to a resurgence in the restoration/rest-mod markets – Early Commodores with LS swaps – The popularity of this has lowered price points to make the process affordable Regulations presently hindering the Australian aftermarket chassis market The push to change regulations to allow for more aftermarket parts production Challenges facing builders with regard to c
Fri, May 31, 2019
Art School the Disney Way
"SQUEEZE THE TRIGGER AND PAINT COMES OUT..." The Gearheads have some cool friends and colleagues, and all have some superhuman talent, making our relationships that much more incredible. Art Alvarez is one of those gifted people, and the gang finally found a few minutes where schedules aligned, and we get the full Art school treatment. One of the pioneers of the early-1980's airbrush movement, Art Alvarez forged a path and a name for himself by pushing to learn the airbrush after seeing one in action at a car show. From there, it's a legendary rise through the ranks, touring with Ed Roth . Where some may have been satisfied at that, Art continued, landing a gig at Disney, drawing custom big rigs, rendering amazing cars, illustrating children's books and traveling the world as a Fine Artist. Oh, and that's just a part of the story. THINGS COVERED IN THIS EPISODE: It all starts with a love for cars and drawing in class Art's brother's '55 Chevy Gasser Managing a Foot Locker leads to a career with an airbrush Growing up in San Ynez and Solvang Learning the airbrush on his own The venerable Paasche Model H Earning a living with the aibrush – Moving back home – Making it big at the La Mirada Swap Meet A chance meeting with Ed Roth – Touring with Ed A portrait of Jackie Gleason opens the door to Disney – Working on backgrounds for Beauty and the Beast – Learning how to brush paint Rehabbing rides like Pirates of the Caribbean Using a dagger brush for all manners of line work Building a portfolio between the Disneyland gig and working as Eddie Young's apprentice Getting a foot in the door by being driven Making the shift to digital
Fri, May 24, 2019
It's Booger Time
" THE JONATHAN GOOLSBY..." Jonathan Goolsby of Goolsby Customs joins the Gearheads for a very interesting episode sixty! We celebrate with talk of Dusters, late-model racing, red boogers and the only aftermarket wheel you'd really like to hug. A Goodguys Trendsetter for good reason, Jonathan talks early influences, development of a build style, and the value of not pigeon-holing a shop. The guys get into a talk about nostalgia, flipping trends on their ear, and under-car neon lighting. If you thought that you were safe from ever hearing about the Aquarius wheel again, well, find your safe space... THINGS COVERED IN THIS EPISODE: Episode SIXTY! The Kasper Duster – The interesting history behind the car – Taking design risks – Stepping outside of the comfort zone by using factory stuff on a custom car – "Not the typical Pro-Touring Car" Talk turns to the lack of an overwhelming new trend – Where things are going – The segmentation of trends – Subtlety and modernization are more popular – Drivability versus a show-stopper – Finding balance in the patina trend A discussion on horsepower Brian proposes the flipped trend: Fiero-bodied supercars – The Fiero 4M4 , a mid-engine, crew cab concept is pitched The Lightning Round! Guiding a client on a project The ever-growing prices of G-bodies and third-gen Camaros Goolsby and the Funky Bunch Sticker Wars! SEMA Thrash talk – Scheduling, show floor visibility and passion collide with no time – The current "multi-car build for SEMA" trend – SEMA build horror stories – The multi-trailer standby backup plan – Brian pitches the "Build it on the Road TO SEMA" competition – Alex comes up with an interior so tasty you'd eat it Shop management – Building and maintaining a team – Having a team of eleven versus a one-man shop – Planning for expansion – Working within a talent pool Involvement with the Goodguys YoungGuys Competition – A discussion of the passion of the young guys – Young welders and amazing TIG welding Composite materials – Where to go after Carbon Fiber – Spot putty as a trend and re-hydrating bondo dust – Brian pitches <a href="https://roundsixpod.com/2018/10/26/the-fiber-at-the-speedkore-david-salva
Fri, May 17, 2019
A Circus of Paint and Lettering
"THE STREETS WERE LINED WITH FUNNY CAR BODIES..." Bert Quimby, the multi-talented, laid-back and very-hyphenated sign, lettering and graphics master from New Jersey joins the Gearheads here on episode fifty-nine! Bert was one of the guys putting down pigment on some of the most memorable funny cars of the golden era at Circus Paint, and has been a trendsetter ever since. The gang sits down and talks about the transition from paint to vinyl, and how to combine the two using modern techniques, as well as sharing insight on the technology and trends of the present day. Bert Quimby is one of the leading lettering, sign and graphics painters in the world, plying his craft in his shop, Bert Graphix in Riverdale, NJ. THINGS COVERED IN THIS EPISODE: Early inspirations SignCraft Magazine Social media and putting work out there – Global versus regional reach The vinyl VS paint argument The $19 Badger airbrush sparks a career First steps in lettering race cars A foot in the door at Mr. J's The days at Circus Paint Painting Top Fuel dragsters for Joe Amato The difference between East and West coast landscaping trucks The power of improvisation on a tight deadline The fickle nature of reactions to work on social media Bringing back the classic 1990's dry brush graphic – Brad's acid-washed jeans – Brian ruins his Dad's garage floor Traditional lettering on a vinyl wrap Opinions on striping a Corvette "You can't always tell what the public wants" Taking on jobs just to keep the lights on The unfair treatment of vinyl wrap installers On making a vinyl job look like paint Dennis Ricklefs The tale of 3,800 Schwinn bikes Lettering boats – Boat names better left unsaid – "I don't want anyone's Grandma mad at me"
Fri, May 10, 2019
Shredded Belts and a Howling Rear End
"IT'S SO... FLAMMABLE." Elana Scherr from Edmunds joins the Gearheads for an evening of laid-back conversation. From first cars to new cars, phone connectivity to all wheel drive buggy design and all points in between, this one runs in all directions. If you were a reader of Hot Rod Magazine over the last eight or so years, you no doubt recognize the name Elana Scherr from her byline and her occasional tales of daily-driving a classic car in LA traffic. We discuss careers in journalism, dog ownership to breeding Lamborghins, we go places so that you don't have to. That said, buckle in an enjoy the ride here on episode fifty-eight. THINGS COVERED IN THIS EPISODE: Covering races in Baja – Riding chase though the desert The gang pitches a new brand of motorsport – Elana goes full-size 1970's car autocross with it – "Carts and Cones" Elana's career – Sculptor's assistant to composite fabrication – Working in PR – Freelance writing to Hot Rod Magazine – Current gig with Edmunds Elana's humble hot rod beginnings – Didn't learn to drive until twenty-one – The '73 Duster that started it all with a starter The first engine rebuild – Marrying your engine builder The episode goes from Mexico to Canada, then to LeMans – Pantsless Germans and carnival rides, oh my – "What is the French word for Tilt-a-Whirl?" Crafting a career in Public Relations Networking and the .3-degrees of separation in the hot rod world Alternative career choices Brian pitches a passive-aggressive car magazine Elana's daily driver troubles – Shredded belts and a howling rear end Alex suggests the banana peel fix for the rear diff noise – "Bananas and ninety-weight" – "Holistic hot rodding" Looking back on vintage new car reviews The "lens of modernity" with regard to old car reviews in the present day A discussion of new car features Talking new car impressions and opinion-changing test drives – Design and luxury versus cost – How cheaper cars "punish" the frugal Vipers and male attraction Working on the Prudhomme biography Talking Lamborghini Muira design beauty
Fri, May 03, 2019
C-10's, Hollywood, Delmo and Art Heists
"I'M TRYING TO CHANGE THE WORLD WITH EVERY BUILD." Del Uschenko, better known in the C-10 and hot rod worlds as Delmo joins the Gearheads to talk trends, relocation and international art heists. Known world-wide as the man behind the "Delmo look," conversation runs wild from the early days in Canada to what's on the horizon. A lot to be learned and adopted to any small shop, whether just starting out, looking to re-brand or move... It's all about recognizing value in relationships a partnering with good people. THINGS COVERED IN THIS EPISODE: The move to the mountains – Burbank to Prescott Del's Canadian roots Shop decorating – The General Lee painting – International art heists – The stain on the wall Starting trends – Adopting the brand that fans created from you work – Going at things backward The Round Six connection to the Delmo brand Hijacking your own brand "Forums" and other antiquated methods of communicating in the car community back in the day The AccuAir relationship and the value of partnering long-term Delmo's hot rod roots The C-10 thing Del's inspiration – Cadzilla – The cars of Troy Trepanier – Foose 's clean build style The advantages of being in Burbank Keeping things movie-themed, Brian goes Tarantino with the timeline One-hundred percent organic, word-of-mouth growth The Del S3 vintage-look LS engine The infamous Y-block LS engine post Brian proposes the "DELephant" late-model Hemi Instant gratification on social media with regard to building a brand – Working at creating an audience "Evil Del Wednesdays" More great reality TV show pitches Passion VS Effort The value of deign and creativity when working with a budget Re-purposing and bringing in unique items from all walks of life The million-dollar build VS a restrained and intelligent build The Philosophy and sheer terror of being turned loose, design-wise Building a Street Freak – Brian becomes a lifestyle/style coach – Music selection – 8-tracks The truck trend swinging in a new direction – The "too soon" move from Squarebody pickups to OBS Trends, or the lack of any new ones Tailoring your brand
Fri, April 26, 2019
A Thumb and a Half Away: Shine Speed Shop
"TWO STEPS FORWARD, NO STEPS BACK." Jimmy Falschlehner, better known as Jimmy Shine, the man behind Shine Speed Shop joins the Gearheads on a freewheeling episode loaded with road trip tales, hot rods, history and a re-imagining of where the brand as a whole is headed into the future. Oh, and an explosive Conan O'Brien set. There's that, too. THINGS COVERED IN THIS EPISODE: Talking projects in the shop Jeff Allison concepts for shop projects Early days and getting into the industry – The "Shine" nickname – "Flesh Hammer" – The first car, nearly thirty-four years to the day Exercising restraint on a build Billy Gibbons' Whiskey Runner – The 24V landing light – The SEMA Ignited traffic story – The Conan O'Brien explosion The '56 Monterey New Orleans road trip The new shop Future projects in the wings – A lakester The red hat at Bonneville with Tony Thacker Surfing and hot rods On taking the hot rod thing seriously The TV years Getting a foot in the door at So-Cal Speed Shop – The interview with Pete Chapouris – A tattoo bond – A veritable who's who of hot rodding at So-Cal in the 1990's Taking a bigger hand in the business side of things "Losing him is like gaining two good people"
Fri, April 19, 2019
Trust Me Doug, it'll be Fun.
"WE'RE JUST GOING TO SHOW THE CAR AND DRINK BEER." Doug Jerger of Squeeg's Kustoms joined the Gearheads live in The Round Six Experience at the Grand National Roadster Show. He brought along good friend Tim Benedict, who shared some great stories from the old days of hot rodding. The gang had a great Sunday afternoon talking hot rods, history, and the incredible story of the accidental AMBR. If you don't know it, you're going to love it. THINGS COVERED IN THIS EPISODE: The ride to Pomona from Phoenix's East Valley Tim's 331 Hemi swap story from the 1960's The days when even junkyards didn't want Flathead engines From Ohio to Arizona The Engle Brothers manage yet another cameo appearance Kenny Gartman's contribution to greatness The 1934 AMBR winner – The incredible history – First go-round – Selling the car in Florida – Tracking the car down in Texas – Rebuilding Dad's creation – The even more incredible AMBR win – "Somebody in their mother's basement didn't like it" The Lithuanian hot rod show scene Almost owning the Jim Ewing coupe (yes, the Super Bell Coupe) The Doane Spencer roadster The Nash Bridges 'Cuda – The Ray Barton Hemi Comparing the eras of AMBR contenders The value of building a team you can count on Making a living VS making a killing The Round Six $600 Lacquer special Thirty-three years as an employee of Squeeg's, and running the show since 2004 On never giving up or giving in, and appreciating what you do every day A lively discussion on bringing color back
Fri, April 12, 2019
The Backstreet Boy of Pro-Street
"I'VE GOT MY KARAOKE SHOES ON." Matt Hay, Pro-Street legend, Indy car parts mogul, Doritos Super Bowl commercial precision driver and all-around nice guy stopped by the Problem Child Kustoms/Round Six Podcast Studio. We had a fun night of laughs, a cruise or two up and down memory lane, and set up a sequel so well that even Peter Jackson would take notice. As conversation moves from the early Street Freak days to the early Pro-Street movement, the gang latches onto what will become a running joke throughout the episode, and the reality of garage-built trendsetting cars get some well-deserved attention. If you missed out on the first wave of Pro-Street, this is the next best thing to having been in the thick tire smoke of it. And if you're just discovering what was arguably one of, if not the most fun and dynamic eras of hot rodding, well, strap in and hold on, because we're going for a ride. THINGS COVERED IN THIS EPISODE: The gang goes off of the rails with reckless abandon The Doritos commercial – The Gary Coleman costume – Learning the ways of production – The on-set experience The brightest of whites The episode goes decidedly Tarantino-esque "The Relics of Pro-Street" The return of the 'Bird – The fortuitous timing of the Revell re-release of the model kit Taking the gamble on reliving the old days – A second generation appreciation for the car – When a thirty year old build wins "Best Engineered" The overhead garage door as metal bending tool – "Flapjack fingers" – "Identify as an amphibious American" Definitive proof that the show isn't scripted Why Matt headed toward street machines versus street rods – "What's up with the zeros?!" The first car, a '69 Mustang – Matt's first engine swap – The great driveshaft hang-up The '66 Mustang – About those gold Centerlines... – A Chevy-powered street freak – The '78 Street Machine Nationals The loan that secured a narrowed rear end – Debbie becomes the prime mover behind the Pro-Street Hay -days The coining of the term "Pro-Street" The Competition Engineering "rules" – When first through third place were separated by one point Competing against Scott Sullivan , Rick Dobberton, Mark Grimes, Rod Saboury and Rocky Robertson The whole "Dare to be Different" thing The '79 Mustang – Budget building The Olds – Building a world-famous ride in a rental house – Alcohol and Thrush mufflers – "...but you were buying every round!" The golden age of sponsorships
Fri, April 05, 2019
Fabricating in Exile with Mike
"WHAT IS THIS RUBBER SACK?" Mike Jones of Exile Fabrications in Apple Valley, California joined the Gearheads in The Round Six Experience at the 70th Grand National Roadster Show. Mike played a BIG part in making the show display what it was by fabricating the e-newsletter sign-up kiosk stands. And when he's not over-delivering on incredible favors, he's creating some of the coolest stuff for everything from rock crawlers to custom cars. Mike talks about his focus on off-road or the past few years, and the transition this coming year to fully-finished hot rods. THINGS COVERED IN THIS EPISODE: The gang thanks Mike for his hard work and help with the Round Six Podcast show display Take a kid to a car show Brian makes a very awkward segue – And then doubles-down with an even creepier transition Mike's background and history with hot rods Mini trucks once again prove to be the gateway Making the transition from off-road to street cars The gang goes flat-billing Current projects in the shop – The twin turbo Lincoln Mike's 1965 C-10 project – A test bed for new products from Exile Fabrications It all started with a Bug – Mike's first VW – Learning about air bags on the fly – Fist outing with the bug led to a first place at Severed Ties The Tacoma – From lowering to butchered first mini Learning to MIG weld and TIG weld Entry to the professional side at Daytec welding cycle frames – Crash of the motorcycle industry The move to building drag cars A jump to Trophy trucks Mike's King of the Hammers ride Billable kilowatt hours Differences between building for off-road versus street cars
Wed, April 03, 2019
Bonus Episode Sample: John D'Agostino, Custom with a K
“YOU'RE LIKE THE JOHNNY APPLESEED OF KUSTOM CARS” Recorded in The Round Six Experience at the 70th Grand National Roadster Show, the Gearheads spent a few minutes catching up with John D'Agostino. In this special bonus episode sample, the Gearheads talk about John's 50th year at GNRS, special awards and traveling the world to spread the hobby of kustom cars. If you've ever wanted to ride shotgun all over the world with the Johnny Appleseed of the custom car hobby, here it is. Huge thanks to John for his time, and look or a full-on episode soon, where we'll catch up on the world tour. THINGS COVERED IN THIS EPISODE: Fifty years of attending the Oakland Roadster Grand National Roadster Show John's involvement with the hobby of kustom cars The Crystal Award Looking back on the "tent year" of GNRS in 1997 – Barely getting into the show prior to cut-off – John invents "traditional racing kustoms" Rainy show weekends and leaky roofs – Brian suggests an interactive salt rock display Kustoms (and the women) of Budapest Car shows in Istanbul Richard Zocchi as ambassador to John D'Agostino – John's first ride in the '62 Grand Prix – The Marcos Garcia/Art Himsl connection – Procuring the Pontiac The secret to John's display set-up On popping a car VS opening all doors – The difference between a first place or a special award The patronage aspect – Elevating the hobby by commissioning builds "When he slams his finger in the door, it's always an even quarter-inch"
Fri, March 29, 2019
Being Tony Thunder
"YOU WROTE ABOUT WHATEVER YOU WANTED TO WRITE ABOUT" Tony Thacker joins the Gearheads, and the talk runs all over the place, as can be expected. From early days in England to a career in magazines, and eventually becoming a United States citizen. Let's just say that Tony embodies the can-do, life redefining spirit of coming to America. In an age when so many take what is on offer here for granted, he spells out just what opportunity and freedom mean, even well beyond our hot rodding hobby. THINGS COVERED IN THIS EPISODE: Retired life Goodwood Festival of Speed – The never-ending fireworks display – Billy Gibbons and flamethrower guitars Bringing American race cars to England Discovering hot rods in England as a paperboy in the early 1960's – Seeing the Mooneyes dragster VS Mickey Thompson A career as an Electronics Engineer spurs a change A chance letter to a magazine nets a job – Good fortune in finding a story The importance of enthusiasm and passion – On not being a good writer or photographer, but still carving out a fifty year career Annie Leibovitz's leg Brian discovers his new favorite magazine The Sun and page three The drunken Dunlop tire test – Run flats and apple brandy The crazy days of long-term car testing for magazines The nude Camaro burnout shoot in England "We kept the prizes" Mangling a DeLorean Enzo Ferrari's secretary – Trading cookies for tours back when the plant was off-limits On traditional hot rods nearing the end of their cycle – The aging-out of a segment of the hobby – The future of the industry Rod Millen's Leadfoot Festival The GM/SoCal Bonneville cars On knowing when to say "yes" An appreciation for the American can-do spirit "The English version of Smokey and the Bandit sounds slightly less exciting" Six years as the Director of the NHRA Motorsports Museum The amazing car collections of Portland – A warehouse full of Ferraris The future of car meets
Fri, March 22, 2019
Creative Management and Mentoring
"THE COMPANIES THAT ARE WINNING ARE CREATIVE" Part two of the Eric Tscherne interview, guest-hosted by his former mentor at Mattel/ Hot Wheels , Carson Lev . In this episode, the Gearheads look long and hard at the importance of management fostering creativity. The discussion works toward the successes in having management with a design background, and leading a creative team. This episode builds upon the last, and contains a wealth of information on navigating the landscape of design in a collaborative environment. Learn how a great design manager or management team can lead and clear a path for, rather than fight or derail a designer. We are beyond thankful to our two friends for joining us and presenting this for your benefit. We hope that you'll adopt many of the ideas discussed. If you have any questions, comments or suggestions, that you'll share them in the comments below. And if you'd like us to bring you more episodes, guests and topics like this, please let us know! Thanks for listening. THINGS COVERED IN THIS EPISODE: Birth of the "Audi-Body Experience" off-road ute project Brian pitches "New Crystal Kambucha" A serious discussion on why and how creative companies are winning in the new market The importance of having creative-minded (an skilled) management leading creative staff How "meaning" has changed in today's market Design beats marketing any day Product development is purely creative – How creative design tells a story, which is what consumers want Fostering creativity by management – The absolute failure of a company that fails to foster creativity The change in retail shopping from big stores to direct and internet sales – Good design can lead the charge versus an entrenched, old-school brand – Designers and management must be linked to be successful Image projection is the most important deciding factor in a purchase, and that is based upon design – Most new cars are sold on phone connectivity and image projection over the model or trim – If you are in management and do not respect your designer, you are dooming your business to fail – Management that won't take risks never reap rewards – The golden rule of Design Management: Remove the obstacle that prevent your designer from doing their job How instant gratification has altered he design/creative goals of companies DESIGN AS THE CORE OF THE BUSINESS, NOT JUST PRODUCT Design is the most intellec
Fri, March 15, 2019
Directing a Design Career
“I'M SEEING KIDS COMING IN THAT PLAYED WITH TOYS THAT I DESIGNED!” Eric Tscherne, the VP of Design at Wicked Cool Toys joins the Gearheads on the fiftieth episode! You may know Eric as a legendary Hot Wheels Designer, having created some of the most memorable models in the modern era, but he's more than the sum of those die cast wonders. We discuss the early days as an intern at Mattel, to being a part of some very successful lines like PAW Patrol (yep, the Nickelodeon show) working as Design Director at Spin Master and Upper Deck, and working with licensed toy lines like Monsters University and more. This may be the first time that a podcast has gone masterclass on crafting a Design career arc. And doubles-down by hosting not only a seasoned pro, but his mentor as well. A lot to learn on this one. We'll be having Eric back, as his career and accomplishments warrant a much deeper conversation. In this episode, we're concentrating on the beginnings of a successful Design career arc, and the manner in which an aspiring student or Designer can follow their passion. The timeline here is centered between 1996 and 2005, and gets into the value of having Design-minded management, a passion-centric company culture, and what it takes to follow a dream. A lot to be learned and inspired by. HUGE thanks to both Eric and Carson for taking the time to sit and discuss these often overlooked topics and aspects, and we hope that they help you in your career planning. Please feel free to hit us up in the comments with any questions, and we'll work to get them into future installments of this series. THINGS COVERED IN THIS EPISODE: Our fiftieth episode celebrates a twenty-year friendship between Eric and Carson Eric's design sensibilities are noted as early as first grade A life-long fascination with cartoons and toys "Toy cars" and tuners/mini-trucks versus the typical hot rod stuff Alex and Brian's Catholic school days come back to haunt once again Finding early guidance at the Cleveland Institute of Art – Life Drawing classes – Animating on an Amiga – Discovering Automotive Design in a basement "You'll never amount to anything if you draw pictures all day." – The hopes that a former teacher is buying Paw Patrol toys for her grandkids The hurdles involved with following a dream or passion – Relocation – Investment of time and energy On interning at Hot Wheels/Mattel – Working alongside legends like Larry Wood – The first Carson Lev/Eric Tscherne project with W
Fri, March 08, 2019
Dan Baker Gets Grilled
"YOU DON'T WANT A GRILLE THAT LOOKS LIKE SOMEONE KICKED IT IN WITH THEIR FOOT" Dan Baker of Alumicraft Street Rod Grilles jumps from the road home to the Round Six Podcast and talks all manners of turning aluminum chunks into chips. More than that, we talk starting a small business, career transition, life lessons, and bartering work for a Pines Winterfront grille. Heck, we even touch on the demise of some Schwinn Stingray bikes. It's got drama, heartbreak and Maytag repair. You aren't going to find that kind of range at twice the price anywhere else. THINGS COVERED IN THIS EPISODE: Dan's involvement in a couple of 2019 Ridler Great-8 cars The history of Alumicraft Street Rod Grilles Attending the 1971 Street Rod Nationals Growing up in the industry Starting small in the back room of Dad's house Using a bandsaw and table saw to craft a grille insert From Maytag repairman to building custom grille inserts The ugly 1937 Dodge sedan that started it all Road trip tales of Dan's first car Scavenging parts from a "buck-a-whack" car The sad demise of that first car (and some Schwinn Stingrays, too) Life lessons and getting priorities in order Building everything to order Watching the most popular grille go from 1936 Chevy to 1937 Chevy car grilles Having your product ripped-off by one of your dealers The multitude of grilles for fiberglass-bodied cars Making sure that a grille fits when it gets to the other side of the world The Pines Winterfront barter story When to call in a pro Keeping up with trends – When discretionary income dictates a trend Working with a designer versus recreating a factory piece The importance of setting up at shows Go-karting The WD-40 connection Window-licking and wearing a helmet; Brad takes a shot at Brian Dan butters us up Brian sees his shadow and decrees the start of show season Alex explores early-Springtime fashion on the left coast
Fri, March 08, 2019
Dan Baker Gets Grilled
"YOU DON'T WANT A GRILLE THAT LOOKS LIKE SOMEONE KICKED IT IN WITH THEIR FOOT" Dan Baker of Alumicraft Street Rod Grilles jumps from the road home to the Round Six Podcast and talks all manners of turning aluminum chunks into chips. More than that,
Fri, March 01, 2019
Banging Metal with Luc De Lay
"AFTER ABOUT FIFTEEN YEARS, I'M LIKE 'MAYBE I COULD BUILD A CAR!'" Luc De Lay sat down with the Gearheads in The Round Six Experience at the 70th Grand National Roadster Show. The son of famed metalsmith Marcel De Lay of Marcel's Custom Metal Shaping (Corona, CA) fame, he has been actively forming custom steel for some of the world's finest hot rods, custom cars and high-end restorations for over thirty-five years. THINGS COVERED IN THIS EPISODE: Noting Luc's involvement in nine of the cars across the aisle from our booth Humble beginnings Getting work with builders like chip Foose, Roy Brizio, Rick Dore, Boyd and more A thirty-year family affair in the shop – Working with his Dad and brother First projects on his own – Having Dad drop in – Marcel finds his way back into the shop after retirement – On keeping up with eighty-six year old Dad – The unfortunate passing of Marcel at eighty-nine The trials of working alone "You don't see a lot of morbidly obese metal shapers" "Dad's fingers are smoking..." The story of Marcel narrowly avoiding bombs during the war Learning because you have to Luc discusses his dream car The attempt to round up a tribute retrospective of cars that the DeLays have worked on – A roughly ninety-car list On having shaped eleven Ridler and AMBR cars Brian proposes the "De Lay Memorial Metal Shaping Award" – The gang proposes making the actual award from fiberglass – "Planishing fists" Moving from classics like Duesenbergs and Delahayes to hot rods The Boydster Boyd's '36 Roadstar – A discussion on a car being ahead of its time – The Sportstar A discussion of "relatable" cars and design The best bang for your "buck" (...is this thing on?) Always building for a builder – The difference between building for an individual versus a shop On knowing when to stop – Fabrication shop hours VS paint shop hours "How big is your scrap pile?" Riding dirt bikes Having the help of his wife in the shop
Fri, March 01, 2019
Banging Metal with Luc De Lay
"AFTER ABOUT FIFTEEN YEARS, I'M LIKE 'MAYBE I COULD BUILD A CAR!'" Luc De Lay sat down with the Gearheads in The Round Six Experience at the 70th Grand National Roadster Show. The son of famed metalsmith Marcel De Lay of Marcel's Custom Metal Shaping ...
Fri, February 22, 2019
Cadzilla and Other Things: Larry Erickson
LARRY ERICKSON GOES FREEWHEELING WITH THE GEARHEADS The Gearheads had the good fortune to sit down for a while with legendary Automotive Designer Larry Erickson in The Round Six Experience at the 70th Grand National Roadster Show. In keeping with the original vision of the podcast, it's a free-form conversation with a master... No outline, no agenda, just a group of friends talking cars, and we're stoked to be able to bring you along. If you've ever wondered what influences an influential designer, this one has your answer. We dig deep into the process of deign, the organic nature, and the progression of the skill, and dive into the build history of one of the most significant custom cars of all time, Cadzilla. Talk gets uncensored and real, and you'll be amazed at just how delicately interconnected so much of hot rodding's history is. THINGS COVERED IN THIS EPISODE: The shift in hot rod culture in the early-1960's The industry-insider's Larry digs into the genesis of the podcast – That moment when your hero is interested in what you do – Karaoke night leads to a podcast – The other side of the podcast, Stories n' Steel – Creating something that no one else has Larry on the importance of documenting industry heroes and their stories – Having to add asterisks every year to the Hall of Fame members list – Learning from heroes, and preserving that knowledge On rounding up the cars for a special exhibition – The power of networking Brad and Brian trade jabs The ever-changing aesthetic of AMBR contending cars – Traditional meets Indy car-themed meets early speed product look –Reflection of the time in a car What influences Larry CADZILLA The Cadzilla project process – Pre-internet collaborative design challenges – The importance of having a team of actively-involved car people – The cost of a marquee build – Billy Gibbons goes down the rabbit hole The evolution of Cadzilla – The Jack Chisenhall/Billy Gibbons connection – The Eliminator Coupe finds its way onto yet another conversation – Getting microscopic on details – On selecting the right car for the project, the Sedanette – Selling the project on one sketch – Staying the course – "Why the Moon tank?" gets answered • "Like Robert DeNiro without the mole" – Another Harry Hibler connection – Air-freighting a 500ci Caddy motor – Art Chrisman's take on the "junk" motor – Trivia: The 500-inch Cadillac engine was the mule motor for the Presidential Limousine – When things get "too cute" – Driving Cadzilla "You can't see the road for 1/4 mile ahead of you, but you feel cool ") • Cadz
Fri, February 22, 2019
Cadzilla and Other Things: Larry Erickson
LARRY ERICKSON GOES FREEWHEELING WITH THE GEARHEADS The Gearheads had the good fortune to sit down for a while with legendary Automotive Designer Larry Erickson in The Round Six Experience at the 70th Grand National Roadster S...
Fri, February 15, 2019
James Owens: Milking the Cash Teats
“IN A WORLD...” James Owens drops into The Round Six Experience at the 70th Grand National Roadster Show, and talks art, acting, cars and the mysteries of the mighty (and oft-misunderstood) Gaffer. In what quickly became our most quotable episode ever, things immediately slide waaaayyy off of the rails, and from there is an on-the-rails/off-the-rails adventure. From early days in art school and school plays to working with A-list studios, James has had a diverse and creatively-fueled career that beautifully paved a path to his present. Follow along, and get an uncensored look at forging a career path in both Hollywood and automotive art. THINGS COVERED IN THIS EPISODE: The mysterious career activities of the Gaffer Jim's hat Alternate-dimension Chip Foose biopic Things go all Maury Povich "We're definitely using some of that" "Feign happiness" Lay pigment and get paid Founding of the Brush Bastards The thunder of Doc Marten boots, the pitter-patter of Vans and the squeak of Converse All-Stars " Stomp's less-intelligent cousin, Mosey " James Owens: the Switzerland of the podcast Painting or acting Jim on the move to Eastern Tennessee From advertising to acting – Making an agent money prior to ever meeting them From the Dad in a Dollywood commercial to the Sultan of Sable – Brian proposes a disastrous ten-year commercial cast reunion project Navigating the LA/So-Cal acting and automotive art worlds – Where the real money is in acting How you can help a fellow artist James' first commission, Speed Demon "Name that car" Center for Creative Studies "I spent my twenties marker high " – Honing art skills with markers A flood of puns and double-entendres A sexually-induced stupor The genesis of Car Noir – Telling a story in the art Avoiding predictabiity Knowing when to pull the plug on a piece Brian proposes "Frankencanvas," the ultimate cast-off art show The magic of Fordite – Mechanical dentures meet Fine Art The creative process "Let's see you act your way out of this, Funny Man" Jim's Hudson Pacemaker ATM mogul "Neckwear Bouillabaisse" Things get... "furry"
Fri, February 15, 2019
James Owens: Milking the Cash Teats
“IN A WORLD...” James Owens drops into The Round Six Experience at the 70th Grand National Roadster Show, and talks art, acting, cars and the mysteries of the mighty (and oft-misunderstood) Gaffer.In what quickly became our most quotable episode ...
Fri, February 08, 2019
Chip Foose and Carson Lev: Repeat Offenders
“WHO LEFT THE SKID MARK IN THE BATHROOM?” The Round Six Experience at the 70th Grand National Roadster Show was a hotbed of activity, and played host to a number of great guests! Here on Episode forty-five, we're joined by pat guests ("repeat offenders") Chip Foose and Carson Lev . It's a two-fer of the highest order, and these guys were a blast. Chip was being honored as "Builder of the Decade," and had an impressive display of a dozen cars, right across the aisle from the Gearheads, and talk turned quickly to judging and building cars to compete for the title of America's Most Beautiful Roadster... As well as macrame, bad puns and poop jokes, naturally. Better than just a social visit, this one goes deep into lessons on licensing, indemnity and marketing, not to mention some great connections with Disney, CarsLand and Round Six. Heck, we'll even throw in some behind-the-scenes history on a few iconic builds. All of that and some Hot Rod Elvis approval on marketing gone weird with our stickers. Enjoy. THINGS COVERED IN THIS EPISODE: Skid marks and giant rings Carson goes sock-free The gang talks AMBR picks – Chip goes outside of the box with his pick The ever-evolving path to AMBR – What it takes today VS in the past – "Beauty" being the operative word VS the entire skill set The process of elimination VS optimization – Good execution of an idea VS poor design/aesthetic of an idea Builder of the Decade, and how that came to be – Even "Hot Rod Elvis" is not immune to oversight – Keeping the spirit of Boyd in a car – Speaking of Boyd... that photo – A discussion of the styling cues on some of Chip's display vehicle choices The 0032 The genesis of Foose Design – The whole story behind the building and the steps that led to it Boydster 1 and 2 – The Boyd bankruptcy The AMBR rules change alleged controversy story The Hemisfear and the JL Full-Throttle story – A lesson in IP and indemnification – Driving a Hillborn-injected 640HP, 2,300-lb car – The last Dick Landy Hemi that almost was – The Tom Gale connection – The cease and desist letter - A lesson in names and licensing - "We don't have to be right; we just have to crush you" - On not being afraid to change directions The Cars Land story – Brad's tool box – A lesson in humility and having things w
Fri, February 08, 2019
Chip Foose and Carson Lev: Repeat Offenders
“WHO LEFT THE SKID MARK IN THE BATHROOM?” The Round Six Experience at the 70th Grand National Roadster Show was a hotbed of activity, and played host to a number of great guests! Here on Episode forty-five,
Fri, February 01, 2019
Tang-y Design and Robot Cars: Jeff Allison
“I DON'T KNOW WHERE TO GO FROM THERE.” The Gearheads spent the weekend at the 70th Grand National Roadster Show, and sat with our good friend, Jeff Allison and talked design, careers and rum-based drink concepts. Forging a career with unique art, ideas and a ton of personality, Jeff Allison is presently the Creative Design Consultant at Shine Speed Shop, where he is re-branding what has become an iconic name in the industry, and having a ton of fun doing it. From humble beginnings, Jeff made a name for himself through his art, and is a lesson in success from the "go your own way" school of thinking. As things often do when you put artists at the same table, conversation freewheels and spins delightfully off of the rails. A laid-back time with a good friend at the Granddaddy of them All, this was a highlight of Saturday in the Round Six Experience. Big thanks to Jeff for stopping by, hanging out with us, and letting loose for a while. Look for more with Jeff here ion the podcast, and be sure to check out all of the latest cool stuff going on over at Shine Speed Shop and Allison Design by visiting the links below in the show notes. THINGS COVERED IN THIS EPISODE: The joy of being regular Jeff taking the position of Creative Design Consultant for Shine Speed Shop – Making your own business cards is a rite of passage An organ stand isn't a suggestive exercise – Yet another ZZ Top reference on the show Re-branding a company as a day job Utilizing a skill set that many don't know you possess Return of the Chrysler Airflow Customizing an iconic design – Risk VS reward – Winning Designer's Choice at Eyes on Design – Revisionist historical tomfoolery for project success – The method design process The gang goes Tiki – Rum-based drinks – Tang finds redemption – The dangers of freeze-dried rum Early art inspiration – CARtoons Magazine , Ed Roth , George Trosley Developing a unique style in a sea of similarly-influenced artists and designers Embracing the digital toolkit Working with Mattel – The Hot Wheels Days – If Hot Wheels weren't enough, Star Wars Hot Wheels doubles-down on cool – The Jar-Jar concept – The ones that didn't make it – Actual research VS Robot Chicken -style research – Barbie the destroyer Toy designers want to design real cars; car designers want to design toys There's always haters The creative process "Compare with..." Jeff goes <a href="https://roundsixpod.com/2
Fri, February 01, 2019
Tang-y Design and Robot Cars: Jeff Allison
“I DON'T KNOW WHERE TO GO FROM THERE.” The Gearheads spent the weekend at the 70th Grand National Roadster Show, and sat with our good friend, Jeff Allison and talked design, careers and rum-based drink concepts.Forging a career with unique art,
Fri, January 25, 2019
Gimme All Your Louvers: Dave Lane Drops By
"TRY NOT TO MAKE IT LOOK LIKE A CHRISTMAS TREE." Dave Lane. We could probably leave it at that, and images of perfect top chops and stance and wheel and tire combos would dance in your head all night long. You're about to embark on a journey that brings oh-so-much more. What does a world-class builder build for himself? What part of a build makes or breaks a man? Has he ever been confused with a guy who fishes for Carp? Some things are better left unknown, but we go there for you because we care. In episode forty-three, leading into the Grand National Roadster Show, we sit with Dave Lane and talk humble beginnings, the process of building a great car, and where stye comes from. We dig deep into the psychology of running a one-man shop, attracting and maintaining a steady flow of work from dedicated clients, and then glance long and hard at what saved the industry back in 2008. If you're just starting out, or even working to restructure your shop or studio or brand, this one is a treasure trove of insight and a case study in the right way to go about it. THINGS COVERED IN THIS EPISODE: Days and days of sanding louvers maketh (or break eth) a man Attracting the right clients for your shop and build style Retaining a core group of clients How to schedule the next project The value of having your clients communicate with one another – Putting the client at ease – Establishing trustworthiness – Seeking clients who share a similar vision Balancing the car's budget VS what it needs – Why Dave's builds don't have radios Brian throws down the George Poteet/Sparkomatic/Pyramid amp challenge The guys wax nostalgic over a Pioneer Super Tuner and N-50's A history of building model cars Dave's first car A chance meeting with Harry Hibler Dave's affair with the ZZ Top Eliminator coupe – The ZZ Top video litmus test – Brad finds a local tie-in to the "Legs" video – Brian picks on Brad – Every red car was "the ZZ Top car" – The ubiquitous ZZ Top key chain Building a car while working full-time and going to school – Starting out with a Pontiac – Putting every dime into a car project Network design in Germany The wagon – Thirteen thousand miles in three and-a-half months – On building a car with zero expectations – Making memories – The roller skate incident Discussing the importance of staying positive through a project – That feeling of accomplishment overcomes the pain every time Using the overall car as the focal point, versus one or two stand-out parts The thunderous impact of subtlety Moving a '33 ford grille shell Dave's first time on a drag strip "Bland when bland wasn't cool" Building a '32 roadster in ninety days</l
Fri, January 25, 2019
Gimme All Your Louvers: Dave Lane Drops By
"TRY NOT TO MAKE IT LOOK LIKE A CHRISTMAS TREE." Dave Lane. We could probably leave it at that, and images of perfect top chops and stance and wheel and tire combos would dance in your head all night long.
Fri, January 18, 2019
The Tucci Two-Fer: Dave and Dom Talk Hot Rods and More
"HAVE AS MUCH FUN AS POSSIBLE." We finally get the chance to fully explore a shop with a true in-house design with Dave and Dom Tucci, a father-and-son powerhouse from Macy, New York. For twenty-one years, Tucci Hot Rods has been building some of the coolest and most finely-detailed and designed cars on the planet, and have forged a reputation a one of the best. A study in humility, this multi-generational family affair is proof that hard work and being of stand-up character will get you everywhere. With Dom leading the next wave and launching his own company, Dom Tucci Design , he's embraced modern technology, design sensibilities and processes, and is forging his own name into the hot rod industry and beyond. This isn't merely an episode that walks down memory lane; it's a study in relationships both in the shop and beyond, and there is a level of sincere respect that just flows at every turn. So much to be learned here from anyone making their way either into or ahead in the industry, ans a lesson in how to take your lumps with grace. Look for more of these guys in the coming year, as we enjoy the heck out of them, and appreciate their friendship. Hope you enjoy learning more about this incredibly talented and hard-working pair. THINGS COVERED IN THIS EPISODE: Talking NSRA Syracuse giveaway cars Growing up around hot cars and appliance repair The Keith Black-blown HEMI Willys Dave's first ride, a 529-wedge motor-powered Falcon – Cruising Genesee Street Working on appliances by day, hot rods by night Rob Ida's skills are everywhere... even this episode Family discussion leads to hot rod building as a career The green GMC that put the shop on the map The fight to feature the truck A twenty-eight and nineteen year old take a truck to SEMA • Hand-rolling FIVE-THOUSAND posters Repairing a broken show truck on the road – Alone in San Francisco, no luggage... and Roy Brizio to the rescue The VERY last-minute SEMA thrash The Fiesta project for Ford – Establishing a relationship with the manufacturer Dom discusses school and earning his degree in Industrial Design The power of networking and bringing in the right players to your team The growth and ever-expanding capabilities of Dom Tucci Design Building sword guards Brian triggers Dave's hatred of rust Salt dust – Like Bonneville without the cool Salt-ternatives – "Pickle-scented roads!" Playing with windshields, Tucci Hot Rods style The Nomad Breaking the story on the Syracuse Nationals giveaway car! 181MPH first pass Coolant on fire!</l
Fri, January 18, 2019
The Tucci Two-Fer: Dave and Dom Talk Hot Rods and More
"HAVE AS MUCH FUN AS POSSIBLE." We finally get the chance to fully explore a shop with a true in-house design with Dave and Dom Tucci, a father-and-son powerhouse from Macy, New York.For twenty-one years,
Fri, January 11, 2019
Codename Chromefinger: Josh Mishler
"THE LONGEST ROADS OFTEN LEAD TO THE BEST DESTINATIONS." We start the new year with a fresh season of the podcast, and our first guest of 2019 is a guy who was one of the first on Brian's list, Josh Mishler. Having started his career very young, writing for the Goodguys Gazette at seventeen years old, and moving up the ranks in the magazine world, Josh has a lot to offer by way of career advice. If you're a young writer or photographer looking to break into the field, you can learn a lot from his story. It's hard work, tenacity, a willingness to learn and networking. Josh is a guy who defines "truly connected" in the industry, and is a testament to how being a considerate, hard-working member of the community can pave the way to a long and fulfilling career. We get into tips and tricks to help make your custom plating experience a breeze, too. A value-packed episode indeed. THINGS COVERED IN THIS EPISODE: The big August fire at Advanced Plating – Resilience in the hot rod industry – Looking back on the flood of 2010 On starting out in the Hot Rod Industry Climbing the ladder in automotive publications – The importance of thanking those who helped to get that first foothold Writing for Goodguys Gazette at seventeen years old Josh's career path and a lot of great advice for anyone looking to make their break – On "knowing someone" – Shadowing the legendary Steve Anderson – The value of learning as you go – From Goodguys to Buckaroo –On looking up to Scott Killeen's work and meeting him – Learning more over a weekend than at school – Freelancing while still in school The whole midwest explosion – Location, location, location First publication in The Rodder's Journal Differences in shooting in the studio to outdoors Nightmares about lighting Brian picks on Brad's lighting set-up Josh on school – A discussion of completing a degree – Josh and Brian on presenting nothing but automotive art through school – The value of a rounded education through formal lasses – The benefit of formal critiques strengthen and prepare you for having a sense of reality about your work – On being diverse in your skill set On being elected to the SEMA Hot Rod Industry Alliance, and taking over the Education Days at the NSRA Street Rod Nationals – Josh's focus on educating and promoting the industry to the youth – Granting knowledge from industry leaders for free to those willing to learn – Making knowledge accessible to all to help solve common issues Josh and Brian reminisce about finishes on the Nailed Buick by Rad Rides – On pushing the envelope with finishes being used in unique ways – The hard work that goes into satin and brushed finishes Tip
Fri, January 11, 2019
Codename Chromefinger: Josh Mishler
"THE LONGEST ROADS OFTEN LEAD TO THE BEST DESTINATIONS." We start the new year with a fresh season of the podcast, and our first guest of 2019 is a guy who was one of the first on Brian's list, Josh Mishler.Having started his career very young,
Fri, December 21, 2018
The Year in Review
"A YEAR IN REVIEW EPISODE? THAT'S SLIGHTLY BETTER THAN WATCHING CORVETTE SUMMER AGAIN . " The Gearheads take a look back at 2018, and do their best version of a 1990's sit-com, and relive the past thirty-nine episodes, the events, travels and terrible puns that made 2018 well... this past year. HUGE thanks to our friends and family for supporting us as we launched this mess, and to Carson for the representation, guidance, and for pushing us through a few big doors. To you, our amazing listeners, fans, followers and friends both old and new... THANK YOU. You've been there through growing pains, bad audio, questionable jokes, and technical struggles. We get better both because of and for you. Thanks for being there over the past year, and we hope that you'll be along for the amazing ride ahead. Good things happening... And that's because of you. Merry Christmas, and happy New Year. May yours be full of good health, happiness an peace. Well, except for when those opening bars of the podcast wind up and blast into your ear holes. We can't wait to fill them again in just a couple of weeks. Our sincerest gratitude once again, Brian, Brad and Alex THINGS COVERED IN THIS EPISODE: Every episode, event and a keen look back at some of our favorite moments from the first thirty-nine episodes
Fri, December 21, 2018
The Year in Review
"A YEAR IN REVIEW EPISODE? THAT'S SLIGHTLY BETTER THAN WATCHING CORVETTE SUMMER AGAIN." The Gearheads take a look back at 2018, and do their best version of a 1990's sit-com, and relive the past thirty-nine episodes, the events,
Fri, December 14, 2018
Intellectual Property Management with Carson Lev
"GETTING A CHECK IN THE MAIL IS THE SINCEREST FORM OF FLATTERY." Carson Lev once again joins the Gearheads for an evening of learning. This time, we're starting an on-going series on Intellectual Property, Copyright an brand management, all aimed squarely at helping artists and designers to protect their work, and lay the foundation for a career. We're joined by co-host Del Swanson, who is nearing completion on his long-term project which has taken him away from the show for a bit, and it's great having him back with us. While not an exhaustive course nor a complete resource, this episode gives advice, and sets any artist or designer up with the basics to begin protecting their work, and ensuring that they're making the work work for them long-term. This will develop over time into an ever-expanding series, and we'll be bringing in industry professionals, brand managers and even legal counsel to help you navigate the territory. We hope you'll join us, as we look forward to bringing this and so much more to you in the coming year. If you're an artist just starting out, or have been established for some time but may be a bit cloudy on Copyright and Trademark and IP, then this is a great jumping-off point for you. Remember: You may be an artist first and foremost; but don't discount the fact that you are an artist in business . THINGS COVERED IN THIS EPISODE: Brian drops the sugar-coated approach, and dives right in Return of the running ball gag joke Carson Lev joins the gang Del stops in following his world-wide Viking tour – The joys of rapping and pillaging while wearing horned hat Discussing the effects of stolen artwork on the artist – The frustration of dealing with Amazon, et.al. on issues of Copyright The dilemma of putting work out there to promote VS protecting the art Learning the difference between types of agreements – Work for Hire VS Consulting Agreement VS Production Agreement VS Licensing or Transfer of Rights The critical importance of properly crafting your agreements Learning licensing by fire – Working in licensing for the giants Are you producing work to be transferred to the client, or licensing it? On making protection affordable for artists just starting out International Copyright and formal ownership on the world stage Chip's work as example: – Realizing the difference between building a car or a library of images to capitalize on Value and its attachment to the work – Added value versus surface value Playing "hide the sausage" for fun and profit – "Phallic extortion" becomes a thing... thanks, Alex Infringement abroad – International filing – High cost may no
Fri, December 14, 2018
Intellectual Property Management with Carson Lev
"GETTING A CHECK IN THE MAIL IS THE SINCEREST FORM OF FLATTERY." Carson Lev once again joins the Gearheads for an evening of learning. This time, we're starting an on-going series on Intellectual Property, Copyright an brand management,
Fri, December 07, 2018
Simple is Hard to Do: Steve Cook Creations
"IT'S FUN TO LOOK AT THEM, BUT YOU CAN'T REALLY ENJOY THEM UNLESS YOU'RE DRIVING THEM." Steve Cook Creations has a reputation of building incredibly clean, detailed and subtle cars, and on episode thirty-eight, the Gearheads got a chance to sit down and talk with Steve, his son Mike, and Alan Childers. We dove deep into the design sense and philosophy of the build team. Steve lays out a lot of insight and perspective on cars as a passion, and the realities of building them as a career. Yep, realities . There's a lot more dimension to putting together an award-winning vehicle, especially when it's for repeat clients who are every bit as passionate about their cars. THINGS COVERED IN THIS EPISODE: Steve talks about the passion of building cars The importance of focusing on quality in every aspect of a build Early automotive influences A great comparison of generations and the sources of their influences Alan's early inspiration via the magazine aisle at the supermarket – WyoTech and an art degree come together Cars run deep in the Cook family From motorcycle acing to Mom the Machinist Struggling with being a workaholic – Trying to find a life-balance Being "so quiet, it's scary" The life of an introverted car builder in a very social society "Simple is hard to do" – Keeping things clean, neatly-packaged and subtle When Dad doesn't understand modern color choices Building cars from memory Make everything look like it belongs Revisiting the theme of the car as a whole, from stance and overall look to the sound and more "Smell the ozone coming off of that electric car!" The fine art of patience on a build – Keeping things moving forward over a three to five year build – The evolution of a project over time On building a car that turns out to be ahead of its time – Staying conscious of the car's "right" timing On the value of research and communication in the shop Where inspiration lies and gets dug up from How being old school lends a unique thumbprint to build style The honor of being selected for a SEMA panel, and making the most of being the "odd man out" sometimes Building what the client remembers the car being, even if it is miles apart in terms of fit, finish and performance Hand-whittling a Duvall windshield by hand over in the corner The "hot rod family" Brian lays out the plan for the zero-gravity paint booth
Fri, December 07, 2018
Simple is Hard to Do: Steve Cook Creations
"IT'S FUN TO LOOK AT THEM, BUT YOU CAN'T REALLY ENJOY THEM UNLESS YOU'RE DRIVING THEM." Steve Cook Creations has a reputation of building incredibly clean, detailed and subtle cars, and on episode thirty-eight,
Thu, November 22, 2018
High Pants Drifter, Brian Lohnes
“HISTORICALLY, I'VE FOUND THAT RASH REFERENCES NEVER PLAY WELL IN MIDDLE AMERICA.” BRIAN LOHNES BRINGS THE ADVICE. The Gearheads were honored to welcome the man with the golden voice, Brian Lohnes. Recently named as the Lead Anchor in all NHRA TV broadcasts next year, it's a dream come true of sorts for a guy who grew up watching it on television. More than just the sum of his manly chest, neck and head that you'll see on race coverage, he's a man with gasoline and room-temperature shrimp in his veins. We talk early days, from his first thoughts ("hey, it's much colder out here!") through College, writing for car magazines, and eventually to television. We laugh, we cry, we explore, we invent things, and then we plot a reunion in three to five years. In many ways, it's a lot like prison, but without most of the pesky romance. THINGS COVERED IN THIS EPISODE: Things start off perpendicular to the finish line The "snowball" effect of episode thirty-seven MOPAR guys are the Star Trek fans of the drag racing world – The 10,000 RPM limit and HEMI engines – Birth of the Polish Pentastar Program ("Number one in Hamtramck!") On being named as the voice of NHRA Drag Racing The ever-changing demographics of racing and the show here Debut of the Ira Spiderman Old Man- nequin No car enthusiast group is safe from generational ridicule Room temperature shrimp The greatest scam in the history of scams at the University of Massachusetts – A Pre-Med, a Pre-Law, an Engineering and an Art History major score a College-sponsored race car – The road to announcing is paved with road racing The requirement of looking out of the window versus at a computer screen Moving from IHRA to NHRA Steve Gibbs gives a big break The constant battle of not crying On "not Hindenburging" the show – The dangers of mentioning skin maladies in color commentary – How digestive jokes will make you the next Dave McLelland – Eczema as a career-killer The reality of an announcing tryout The gang goes "Aristocrats" The value of doing your research before calling an event Launching Bangshift and its predecessors A t-shirt with "BS" emblazoned on it – The value of a URL like manjunk.com in today's dollars Why people from Buffalo are the toughest ones on the planet Put Up or Shut Up The Gearheads make their Race to the Moon pitch – Private space programs as entertainment – Ultimate Capture the Flag TV show idea Searching for old drag strips – Brian suggests an Ancient Ali
Thu, November 22, 2018
High Pants Drifter, Brian Lohnes
“HISTORICALLY, I'VE FOUND THAT RASH REFERENCES NEVER PLAY WELL IN MIDDLE AMERICA.” BRIAN LOHNES BRINGS THE ADVICE. The Gearheads were honored to welcome the man with the golden voice, Brian Lohnes. Recently named as the Lead Anchor in all NHRA TV ...
Fri, November 16, 2018
Roger Hickey: Gravity and Coyote Attacks
"YOU START OFF BY GOING SEVENTY MILES PER HOUR STANDING UP." ROGER HICKEY LIKES SPEED. The Gearheads host entrepreneur, world record-holding gravity racer, aerodynamic expert, inventor and coyote attack survivor, Roger Hickey. If you've never gone downhill on a skateboard at one-hundred miles per hour, been mistaken for an alien craft, or lit off your dad's fuel car in the garage at eight years old, then you're not our guest on this episode. Much like the Highlander, there can be only one Roger Hickey, and by golly, are we stoked to have spent the evening with him. From his days as an undefeated gravity racer to his current quest to help a stock-bodies 1953 Studebaker run 400MPH, the guy has nerves of steel, and has broken more bones than Brad has read books. And he's a ton of fun, too. Lots to learn in this episode, so buckle in, and enjoy this downhill blast. THINGS COVERED IN THIS EPISODE: "Cheese Guard"/Cheese garden Evel Knievel Lite Coming out of retirement to compete for a world championship after winning twenty of them previously – "Your old shit ain't gonna fly here" – One hundred miles per hour on a skateboard Let that last one sink in Early attempts at downhill on Kellogg Hill Filming a GTE Superbowl commercial – Being mistaken for an alien The case of the fuel car and the babysitter "The boat story" A history of speed in the family – Racing since three years old "Control all of your variables and you can't lose" The high degree of concentration required in gravity racing Researching and engineering in the pre-internet days – The school of "crash and learn" The invention of Street Luge on Glendora Mountain – F1 car inspiration Getting bit by a coyote at speed "Every rule has an elastic waistband" INNOVATION THROUGH EXPERIMENTATION Portable skateboard ramps Composites return to the podcast! – More pre-internet experimentation leads to innovation Setting Electric Car World Championship records... and then some The Hickey Law The science and theory behind cryogenics Running 326MPH on a 238MPH record with a stock-bodied 1953 Studebaker 6.000 HP on bald tires The modular streamliner design Return of the Saltomasochist "A chess match of nitro and exploding things"
Fri, November 16, 2018
Roger Hickey: Gravity and Coyote Attacks
"YOU START OFF BY GOING SEVENTY MILES PER HOUR STANDING UP." ROGER HICKEY LIKES SPEED. The Gearheads host entrepreneur, world record-holding gravity racer, aerodynamic expert, inventor and coyote attack survivor, Roger Hickey.
Fri, November 09, 2018
From the Lodge at Camp Wannapaintem: Cristina and Jeremy
A THIRTEEN-FOOT CANOE, BEARS, SQUIRRELS AND A FEAR OF SNAPPING TOWELS. The Gearheads went deep into the woods of the 2018 SEMA Show, and wandered into Camp Wannapaintem, PPG's latest show-stopping display. We were fortunate to fall under the guidance of camp counselors Cristina Fronzaglia Murray and Jeremy Seanor (of Lucky Strike Designs). We sat for a while and discussed paint technology, creativity, marketing, and the importance of passion Most important of all was the lesson that paint is fun. It's not merely a tool or just coating, but a vehicle in and of itself, capable of launching careers and forging lifelong friendships. Even after a certain podcaster suggests a prison-themed trade show booth. THINGS COVERED IN THIS EPISODE: Talking SEMA Show booth themes – Gathering items to decorate the booth The "Homeless Chic" John Jackson Where inspiration lives Jeremy paints a canoe Our own Brad's connection to a past themed booth A terribly inappropriate booth theme idea made presentable Brian chooses a favorite among his sons How to turn a group of adults into a bunch of three year olds (HINT: it involves whistles) Paint is fun Experiencing color in different ways Waterborne and Envirobase paint technology versus solvent-based – Adapting the new tech to creative paint – Progressing with paint technology in both collision and custom work The changing times: – Hot-plating enamels and crushing pigment from leaves – Moving cure times from cigarettes between coats to social posts between coats The longevity of Deltron – Hosting a fourteen year old paint job in the booth illustrates quality like nothing else Booth design as a team-building exercise The value of not having to be engaged in the "SEMA crunch" Brian offers the then-thousand dollar marketing idea History of the PPG theme booths A custom painter reunion of sorts every year in the booth "The greatest paint in the world, used by the greatest painters" – The value and appreciation of humility The "prison" theme booth – Alex offers the idea of carving a shiv from a paint stir stick More great booth theme ideas: – "Paint Church" – "Rascal in a China Shop" – "Barefoot on Legos" CAREER ADVICE FOR THE MOTIVATED LISTENER On the importance of being yourself and making mistakes – Career growth through understanding passions Teaching the technical aspect, and the inability to teach passion Four-year education versus hands-on trades The value of a combination of traditional school degrees and trade school/knowledge The misinterpretation of trades being just "dirty work" Recognizing the minds and hands that aren't meant to sit in a class
Fri, November 09, 2018
From the Lodge at Camp Wannapaintem: Cristina and Jeremy
A THIRTEEN-FOOT CANOE, BEARS, SQUIRRELS AND A FEAR OF SNAPPING TOWELS. The Gearheads went deep into the woods of the 2018 SEMA Show, and wandered into Camp Wannapaintem, PPG's latest show-stopping display.
Fri, November 02, 2018
SEMA Show 2018
THE GEARHEADS GO DEEP INSIDE OF SEMA SHOW 2018 AND SURFACE RELATIVELY UNSCATHED. WELL, MOSTLY. SEMA Show 2018 winds down, and the Gearheads were granted some pretty hefty access. We took some time to sit and discuss the show from the Magnaflow stage in Hot Rod Alley. We wanted to thank some old friends, recognize some new ones, and reflect on what was easily the most memorable show in any of our memories. THINGS COVERED IN THIS EPISODE: The dreaded "SEMA legs" syndrome Cue napkins and dirty words Brad is really old Our favorite vehicles of the show Tim Strange is awesome at hosting vehicle debuts The Squarebody Syndicate Indy Tribute truck Tuesdays with Chip The hot rod family Set-up logistics – The weirdness of wandering the SEMA Show floor on Sunday – From typhoon to fully-carpeted halls Carson makes it happen The Syndicate Series t-shirt boxes The Engle Brothers slip into yet another episode SEMA Show Zamboni adds to the ambiance Judging the BASF best paint award with Chip Foose – Getting a private tour of Impostor Chip's C/28 Strope's Olds The Speedkore carbon fiber Charger The art of walking ten miles per day
Fri, November 02, 2018
SEMA Show 2018
THE GEARHEADS GO DEEP INSIDE OF SEMA SHOW 2018 AND SURFACE RELATIVELY UNSCATHED. WELL, MOSTLY. SEMA Show 2018 winds down, and the Gearheads were granted some pretty hefty access. We took some time to sit and discuss the show from the Magnaflow stage i...
Fri, October 26, 2018
The Fiber at the Speedkore: David Salvaggio and Lyle Brummer
COOL CARS AND SOME VERY NORMAL PEOPLE FROM THE LAND OF ED GEIN AND JEFFREY DAHMER. The Gearheads grabbed a few valuable minutes of pre-SEMA Show thrash time to sit with David Salvaggio and Lyle Brummer of Speedkore. To say that we walked in as fans of their work would be understandable. Walking out of the studio as fans of their character and knowledge, well, that's a no-brainer. Fantastically fun, intelligent and humble guys who are pushing the envelope with technology to build some of the coolest cars out there. We dig into the business, the tech, the cars, and the carbon fiber in this informative, exciting and laid-back episode. THINGS COVERED IN THIS EPISODE: The week-before-SEMA-Show thrash The logistics of bringing five vehicles to the show – Last minute details and avoiding mishaps – Working with carbon fiber and the supply chain demands thereof Discussing the early automotive influences of Dave and Lyle – Wisconsin is proving to be a fertile land for breeding hot rodders – David's Grandfather came from Sicily in the early4-1900's and built and raced cars at Indy (1929) Lyle's start in cars came later in life – Began with engineering and technology – Speedkore's commitment to bringing in the next generation On driving in snow – A pitch for the Jamaican Rally Car Team The start of Speedkore –On building a scalable business model – The problem of sourcing and retaining talent – The benefits and advantages of carbon fiber parts and manufacturing them Forays into the motion picture world – Providing cars for The Fast and Furious franchise The Chris Evans Camaro – The Robert Downey Jr. connection Return of cars as the great equalizer and common language The great things about carbon fiber A degree in Marketing VS working with your hands Digging into the manufacturing and design process On the value of experience over formal classroom time – Induction to the Society of Automotive Engineers on a fourth-grade education Talking about the Evolution Charger that will debut next week at the SEMA Show in Las Vegas A discussion of design and the tactile experience Advice for up-and-coming designers
Fri, October 26, 2018
The Fiber at the Speedkore: David Salvaggio and Lyle Brummer
COOL CARS AND SOME VERY NORMAL PEOPLE FROM THE LAND OF ED GEIN AND JEFFREY DAHMER. The Gearheads grabbed a few valuable minutes of pre-SEMA Show thrash time to sit with David Salvaggio and Lyle Brummer of Speedkore.
Fri, October 19, 2018
Zane-al Retentiveness and the Cullen-ary Art of Hot Rods
TRENDSETTER, HALL OF FAME MEMBER AND ALL-AROUND NICE GUY ZANE CULLEN JOINS THE GEARHEADS. THEN WE CORRUPT HIM. The Gearheads spent the evening with our good friend Zane Cullen of Cotati Speed Shop. He's a Goodguys Trendsetter, a Grand National Roadster Show Hall of Fame member, a father and husband. Zane is also a new product judge at the SEMA Show . And one of the three behind the Triple Gun of Excellence Award at GNRS alongside Darryl Hollenbeck and Charley Hutton. We dig deep into the science of running a successful hot rod shop, personnel management and horribly inappropriate jokes. And probably some other things we should have edited. Our lack of detail is your gain. THINGS COVERED IN THIS EPISODE: Conversation immediately goes all SEMA Talking track-style 1968 Camaros Getting outside of the box of "expected" build styles Getting deep into the HR aspect of running a shop – Finding the right personnel – The importance of communication – Balancing the talking with listening Effective communication between shop and client Evolution of a brand and a business plan The genesis of the shop The evolutionary process and continual improvement – Competing against yourself to raise the bar internally Growing from two to sixteen team member – Thinning the herd to keep things manageable – Finding the "magic number" in the shop to keep things moving in the right direction – Maintaining a good staff – The importance of getting along – Keeping a focus on the work VS making things personal On retaining a client base during the busy times Finding a balance between directing and welcoming creative input – Building a complementary team of creative visionaries and detail-minded craftsmen Working to manage egos and behaviors as well as work output The importance of not forgetting the people involved on a project – Taking the good with the bad Things go decidedly sexy Brian tales his share of abuse this time "You can't spell TEAM without T-E-A..." Appreciating your team and employees ONWARD TOWARD THE SEMA SHOW Behind the scenes at SEMA, judging new products with Dave Tucci and Tim Strange – Having the opportunity to actually see the new products at a show dedicated to new products – Finding the worst of the rest – Brian develops the "Tick-Lo
Fri, October 19, 2018
Zane-al Retentiveness and the Cullen-ary Art of Hot Rods
TRENDSETTER, HALL OF FAME MEMBER AND ALL-AROUND NICE GUY ZANE CULLEN JOINS THE GEARHEADS. THEN WE CORRUPT HIM. The Gearheads spent the evening with our good friend Zane Cullen of Cotati Speed Shop. He's a Goodguys Trendsetter,
Fri, October 12, 2018
Guys on Film: Rappin with McGaffin
TALKING MAGAZINES AND MORE WITH PHOTOGRAPHER ROBERT MCGAFFIN. The Gearheads spend an evening with Robert McGaffin. He's an Automotive Photographer, industry good guy, friend and the Creative Director and co-Founder of Wheel Hub Magazine . From early days building and shooting model cars to school and a carer in Commercial Photography, Robert has some varied experience. Yet it all comes back to cars. The guys over at Robert's latest venture, Wheel Hub Magazine have been gracious in extending an offer to listeners of the Round Six Podcast. Head on over to their website at www.wheelhubmag.com/roundsix and you'll receive a two-for-one special. Huge thanks to them, and to you, our listeners for your support. THINGS COVERED IN THIS EPISODE: Growing up in Wisconsin – From puddle of goo to model glue An early start shooting model cars with an Instamatic From College to Commercial Photography Burning dust with studio lighting Astrophotography Early influences First trip to the SEMA Show Favorite cars of all-time – Rad Rides' Chicayne Riffing on motorsports photography – Rally driving – Isle of Man TT Really niche photography Brian's strange surgical history Rob's Steve Strope story Brad takes a few more lumps Robert's '65 Olds project On the dynamics of print VS digital coverage Launching Wheel Hub Magazine – Assembling the team – Creating the Beta – Developing the look – Selling ad space – The launch at GNRS On keeping it fresh when shooting the same car multiple times for multiple publications When a car owner wants nothing to do with a magazine Making do and improvising on a shoot On cameras and equipment Teaching four-week photography programs The importance of quality lenses over the latest and greatest camera body Suggestions for beginning photographers – Happy accidents and learning on the fly The forthcoming Round Six Massage Parlor editorial – Alex gets a new job description – A "full release" of pure disappointment Things to look forward to at the SEMA Show
Fri, October 12, 2018
Guys on Film: Rappin with McGaffin
TALKING MAGAZINES AND MORE WITH PHOTOGRAPHER ROBERT MCGAFFIN. The Gearheads spend an evening with Robert McGaffin. He's an Automotive Photographer, industry good guy, friend and the Creative Director and co-Founder of Wheel Hub Magazine.
Fri, October 05, 2018
The Jimi Day Experience
ALEX AND BRIAN JAM WITH JIMI. Brad was off on a top-secret mission at Steve Strope 's place, and that left Alex and Brian to do their thing. It was the perfect time to grab a guest we've wanted to have on for some time, Jimi Day of FM3 Marketing. We're just weeks out from the SEMA Show, and it was a nice, relaxing evening talking to one of the amazing people behind may of the absolutely mind-blowing automotive events which his company produces and promotes. If there's any truth to the old adage of a podcast hitting its peak in their thirties, well, they're starting off with a bang around here. Welcome to the big three-oh, kids. THINGS COVERED IN THIS EPISODE: Jimi on planning an event – The planning process for an event – The "event plan" – Moving from the event plan to the playbook Jimi's headband The planning timeline Search for the Ultimate Street Car On building an NHRA-quality track on Woodward Avenue for a one-day event Brian plots the Altamont of car events On eliminating surprises and executing in the moment as necessary On the old days of car shows VS the modern From Imagine Motorsports and investment-grade restorations to driving cars – Preservation vs enjoyment FM3 Road Trip Cars and Cones – The incredible concept behind the event – Sign up for 2019 at fm3roadtrip.com How investment banking bred confidence The gut/brain connection and how to utilize it Getting outside of your comfort zone to create something new Drive Auto X – Getting people involved – All about seat time (12-14 runs per day!) – No more shagging cones On exit strategies and economic indicators – Planning on the fly The Pony Car Steeplechase Challenge is pitched For more information, or if you;re looking to create your own signature event, please reach out to Jimi and his amazing team at FM3marketing.com, or hit Jimi direct on email at jimi@fm3marketing.com . For information on the Drive Auto X program, please hit www.driveautox.com .
Fri, October 05, 2018
The Jimi Day Experience
ALEX AND BRIAN JAM WITH JIMI. Brad was off on a top-secret mission at Steve Strope's place, and that left Alex and Brian to do their thing. It was the perfect time to grab a guest we've wanted to have on for some time, Jimi Day of FM3 Marketing.
Fri, September 28, 2018
A Well-Executed Fart: Steve Strope
THE GEARHEADS GET INSPIRED BY STEVE STROPE. The Gearheads spent the evening talking with the always opinionated, always fascinating and extremely insightful Steve Strope of Pure Vision Design . We talked cars, bass guitar, millennials and even splitting wood... And it all came back to a central point: Just get out there and do something. Steve isn't one to mince words, and his motivational style is representative of his East Coast upbringing, which he and show host Brian share. From Summers mowing lawns to Winters spent shoveling, a kid learns to hustle. Steve has made that into an art form, applying that work ethic to the humblest of beginnings with his own shop. It's not all fun and laughs, as the conversation gets a bit deep into family matters, adoption, health issues and more, but Steve's impressive and contagiously positive attitude make for one heck of a learning experience. An incredible episode with a dynamic guest. THINGS COVERED IN THIS EPISODE: Steve on reality TV – His new show "Hand Built Hot Rods" – Joe Rogan's Nova – "The fall of Camelot" Talking projects in the shop Where Millennials can send their job applications Making the move to the West Coast from New York The black Camaro that got Steve into cars Growing up in a small town – A grammar school Road Runner art project – "This is my drug" Cars are not a "phase" – Retaining the excitement It all starts with BMX bikes – Steve's vintage BMX bike collection The power of great inspiration Doing what you have to do – Building a car in a parking garage – "I wanted to bad enough" Heading on power tour with a Kinko's-made promo pack Family life – On finding out he was adopted Character-building stuff – Yard work and responsibility – Mowing the lawn as therapy – Porno crop circles On music – Playing bass guitar – Starting with a short bass purchased by his Mom at a garage sale Commuting from – Living next door to the beach house from Top Gun A day in the life of Steve Starting out – The struggles of sleeping where you build On riding the "trend pony" – Personal pride in a build Hot Rodding in Bill's Eye in Street Rodder – Hot rods as the great social equalizer Brad's Grindr profile
Fri, September 28, 2018
A Well-Executed Fart: Steve Strope
THE GEARHEADS GET INSPIRED BY STEVE STROPE. The Gearheads spent the evening talking with the always opinionated, always fascinating and extremely insightful Steve Strope of Pure Vision Design. We talked cars, bass guitar,
Fri, September 21, 2018
It's About the People: Brian Brennan and Naked Street Rodders
THE GEARHEADS TALK EVERYTHING HOT RODDING WITH BRIAN BRENNAN. The Gearheads sit down and talk all things street and hot rodding with Brian Brennan. As the man with fifty years at the helm of some of the leading magazines in the industry, he has a few tales to tell. Suffice to say, this one is loaded with incredible stories. We go deep into his experiences with legends like Pete Chapouris , Little John Buterra and more, and even get into the life lessons of hot rodding. Looking toward he future, we come to realize that the industry is doing just fine, and that the hobby is on the path it needs to be to keep kids involved... Even if they're not into the same cars their parents may have been. Learning just what a positive and adaptable attitude Brian has, it's easy to see why he has had such a successful career: His finger is squarely on the pulse. THINGS COVERED IN THIS EPISODE: The four steps of the magazine business – Inform – Educate – Participate – Inform We talk about podcasting and what it means to the hot rod industry Brian Brennan launches his podcast "Barn Finds with Brian Brennan" Tales of Little John on the tenth anniversary of his passing – Road trippin' with Buterra – Sleep all day, drive all night – On being self-taught – Starting the billet movement – The on-again/off-again Boyd/Brizio relationships – On the whole thing being about the people, not the cars The hot rod thing and mortality – Brian shares some very personal insight Tales of the Colorado State Trooper Thirteen treks across the county in a roadster – People just want to talk cars Brought into the business by Tex Smith Naked street rodders (and drive-by moonings!) Current and coming trends – On the popularity of classic trucks – Squarebody Chevy trucks – The resurgence of the pre-'49 cars On shooting features – How social media has altered things – On shooting a feature at a show vs on-site Choosing a favorite event The Triple Crown of Rodding Judging for national awards – Building the judging team – Moving from traditional "show cars" to hot rods in AMBR – On the return of chrome brake rotors Opening the model year cut-off in Street Rodder Magazine On a 300+ page issue of Street Rodder On what the new trends may be Why Brian's screwdrivers are dipped in rubber On the importance of paying dues as a car guy prior to writing about cars On starting out as a muscle car/drag racing guy Fodder for stories</
Fri, September 21, 2018
It's About the People: Brian Brennan and Naked Street Rodders
THE GEARHEADS TALK EVERYTHING HOT RODDING WITH BRIAN BRENNAN. The Gearheads sit down and talk all things street and hot rodding with Brian Brennan. As the man with fifty years at the helm of some of the leading magazines in the industry,
Fri, September 14, 2018
From No Brakes to the 200 MPH Club: Mike LeFevers
THE GEARHEADS TALK ENGINES WITH MIKE LEFEVERS. The Gearheads sit down and talk engines, Bonneville records and more with famed racing engine builder and machinist Mike Lefevers of Mitech Racing Engines. He's soft-spoken guy with some serious history. LeFevers was the Engine Development Director at Carroll Shelby Enterprises, spent five years in Gale Banks Engineering engine department, and was involved in the Buick Indianapolis program. He's not only the Treasurer of Save the Salt and Secretary of the Bonneville 200 MPH Club, he's also a life member of the latter. He is the LeFevers part of the Kugel/LeFevers 1992 Firebird, which was the first production-bodied automobile to exceed and set a record over 300 mph in 1999. And it has power windows. Just like Mike, it's full of surprises. THINGS COVERED IN THIS EPISODE: Recreating the '79 Kugel engine to reset the record Mechanical injection and twin turbos on alcohol Early beginnings with a '56 Crown Vic... and no brakes Losing eyebrows while tuning cars On learning in the driveway The value of reading what is pertinent to your interests A foot in the door at Gale Banks Engineering Being mentored by Wally Cartwright Heading to Bonneville with A very special Hanky-Panky First runnings at Bonneville with Bruce Geisler The Sundowner Corvette – 255 MPH in a stock-bodied '68! The first stock-bodied car to go 300MPH – The Kugel/LeFevers Firebird Getting family involved – Working to get his sons into the 200 MPH Club A record-breaking year at Bonneville Speed Week SCCA and Trans Am involvement Putting his own shop on hold The Shelby years – Investigating the Chrysler V6 engine failures in the Shelby Can Am racing program – Started as an engine builder on the Cobra Continuation Series – Development of new heads (the aluminum VS iron head argument) – Developing, casting and building new 427's – Working with Carroll Shelby – Shelby was more of a businessman than a tech guy – Lee Iacocca killed the Shelby DOHC 4V 427 Ford cylinder head program Mike's thoughts on the great engineering of the Ford 427 SOHC On building small and big-block Chevy engines The "idiot-proof" nature of the LS engine Vipers and the recession – Development of dry-sump systems and intake manifolds – What is it with this guy and snakes?! On gauging the health of the industry via your customer base Modern tech VS old-school know-how The importance of knowing the source of your research materials Building the engine to the car
Fri, September 14, 2018
From No Brakes to the 200 MPH Club: Mike LeFevers
THE GEARHEADS TALK ENGINES WITH MIKE LEFEVERS. The Gearheads sit down and talk engines, Bonneville records and more with famed racing engine builder and machinist Mike Lefevers of Mitech Racing Engines. He's soft-spoken guy with some serious history.
Fri, September 07, 2018
SEMA, Projects and the Monkey Montage: ChurroFest 2018
THE GEARHEADS UNWIND AND TALK SEMA, SPONSORSHIPS AND PROJECTS. AND BROWN DIAMONDS. Episode twenty-six goes all sorts of places as Brian, Brad and Alex discuss projects of the artistic and four-wheeled sort. They preview the SEMA Show preview, talk churros and racecar sponsorships, and then it all goes weird with kit car talk and celebrity tribute parts. It's been a while since we just sat and talked, and thought it was a good time to lay back a bit prior to the buildup to SEMA madness. THINGS COVERED IN THIS EPISODE: Brian goes all "Show Host" Brad talks streamliner sponsorships – The Salt-O-Masochist PR disasters A blurry blue lightning bolt – Terrible racecar sponsor team-ups – ...and some memorable ones Things that rhyme with "six piston" "Don't worry; it's not you ." Brian runs out of side effects The SEMA preview, well, preview Bacon-wrap and pumpkin spice all of the things. Except for the churros. Alex's '64 Chevy project – Finding the truck – Then come the bees and spiders Alex talks plumbing and wiring Brad steals the truck and lowers it How patina won on this truck Checklists on a project – Brad calls back to his Dad's el Camino Customizing a car is a slippery slope Restoration meets hot rodding The joy of wiring and plumbing Alex's first project The infamous 1969 Camaro The lowest production number '71 Camaro RS The guys go all kit car "The Lisper"
Fri, September 07, 2018
SEMA, Projects and the Monkey Montage: ChurroFest 2018
THE GEARHEADS UNWIND AND TALK SEMA, SPONSORSHIPS AND PROJECTS. AND BROWN DIAMONDS. Episode twenty-six goes all sorts of places as Brian, Brad and Alex discuss projects of the artistic and four-wheeled sort. They preview the SEMA Show preview,
Fri, August 31, 2018
Throwing Back a few Torts with Chris Jacobs
CATCHING UP WITH CHRIS JACOBS Episode twenty-five is a reunion of sorts on a few levels, as the Gearheads take a few minutes to catch up with a friend of the podcast, Chris Jacobs. An actor-turned television host, he's most well-=known in our industry and hobby from his work on Overhaulin' with another good friend of the show, Chip Foose , as well as one of the roaming personalities at the Barrett-Jackson auctions. Boasting a variety of roles on TV shows like The X-Files , Two and a Half Men , and even V.I.P. with Pamela Anderson, where he played a surfing Doctor. Yeah the guy has done a lot of really cool stuff. He's blast to hang out with, and is just a genuine, good human and a true credit to the hobby. THINGS COVERED IN THIS EPISODE: Brian sings the praises of the TSP-7411XR Mk V FriendMaker telescope for "keeping in touch" Things get litigious early in this episode Whoring a podcast intro for all its worth Long Lost Family enters its fourth season – The parallels between Long Lost Family and Overhaulin' – Chris' personal connection to the show – "It's me without a hat" – How timing plays an important role in the show and in life Inspired to enjoy cars via his brothers' cars Auditioning for the role of host on Overhaulin' – Avoiding the drama – The freeing aspect of zero drama – From seven to twenty-nine episodes – On establishing a genre – The impact the show had on building a career Hosting the on-site vehicle coverage at Barrett-Jackson – Another A-team entirely The unforeseen dangers of a stolen car prank – A gun is pulled – "This is really real now" – Zero poop – The unflappable Chip – Loco Chip ("The Evil Gang of Solvang") – A shout-out to Scott for not altering hot rod history The 1987 Grand National – The magic radio Chris' 1968 GTX – 392 swap by Mark Worman and the crew at Graveyard Carz – To be auctioned at Brrett-Jackson Scottsdale in 2020, with proceeds to benefit Special Operations Warrior Foundation – Chris' sincere value of service personnel The salad days of Chris' acting career – Dr. "Banzai" Kovacs. IMDB it. – The joys of residual checks – On acting as a career with a fallback career in place SEMA Show 2018
Fri, August 31, 2018
Throwing Back a few Torts with Chris Jacobs
CATCHING UP WITH CHRIS JACOBS Episode twenty-five is a reunion of sorts on a few levels, as the Gearheads take a few minutes to catch up with a friend of the podcast, Chris Jacobs. An actor-turned television host,
Fri, August 24, 2018
From Mullet to Billet: Brad Fanshaw
BRAD FANSHAW SPENDS AN EVENING TALKING BRANDING, MARKETING AND ADVENTURE Episode twenty-four gets right into it with the man behind more cool stuff than you can shake a billet guitar at. Brad Fanshaw has launched action sports brands, managed the most well-known hot rod shop in the universe, and was the first to take an automotive aftermarket company public. He hosts a couple of well-known podcasts: Man Seeks Adventure (with Dave Marker and Heather Storm) and Shift and Steer (with co-hosts Aaron Hagar & Matt D'Andria; and formerly with the late Pete Chapouris ), along with producing television shows like Car Warriors and The Car Chasers . The guys sit and talk marketing, branding, and the value of an experience and not simply having a product, as well as gleaning valuable tips and tricks for making the most of your SEMA Show experience. THINGS COVERED IN THIS EPISODE: Entomology, Shrek 4D and a Dorian Gray reference Early VW influence once again surfaces on an episode Brad's first car – Having the fastest car in High School – Making twenty bucks street racing before homeroom – The vintage Pro Street parts stockpile A sidetrack leads to gold Moroso valve covers Memories of header installs – Accessory bracket spacers – The joys of constant re-torquing Brad's orange thing It all starts with BMX in our industry – The freedom of transport and self-expression Running ABA and organizing Nationals – The joys of running a front loader – The Orange Fairgrounds incident – Blame it on the monster truck guys Being "productively destructive" Taking Vision Street Wear from $10M to $125M in five years – Genesis of The X Games – Running the largest television production company in Orange County – From action sports to a Boyds clothing line Cadzilla leaves the shop, Brad comes in Building the Hot Rods by Boyd empire – The value of first-class marketing in a new frontier – Laying the groundwork to bring in investment capital – Reaching outside of the automotive world to retain the hot rod spirit Brian proposes a Virtual Reality Venture Capital pitch Starting a watch company SUPER-BONUS TIPS FOR MARKETING YOURSELF/YOUR SHOP AT THE SEMA SHOW: The value of technology/technique sharing Building the Starbucks of the hot rod world – The experience of being a part
Fri, August 24, 2018
From Mullet to Billet: Brad Fanshaw
BRAD FANSHAW SPENDS AN EVENING TALKING BRANDING, MARKETING AND ADVENTURE Episode twenty-four gets right into it with the man behind more cool stuff than you can shake a billet guitar at. Brad Fanshaw has launched action sports brands,
Fri, August 17, 2018
Making Old Men Polish Bolts: The Spirit of Hot Rodding
JF LAUNIER BREAKS THE RULES... AND HAS SOME PUT IN PLACE BECAUSE OF HIM Episode twenty-three heads to The Great White North and drags JF Launier back like a felled case of Labbatt Blue. JF is a long-time friend of Brian's, and brings his outstanding, catchy spirit of what hot rodding really is to the podcast. Who else can say that they've built a Ridler Award winner and then done donuts in Cobo Hall with it? Or driven it at the Optima Ultimate Street Car Challenge? No one that we know outside of this JF guy. Aside from a veritable metric ton of Canadian references to get the show rolling, it all goes onto mind-blowingly cool territory with a guy who just gets it. THINGS COVERED IN THIS EPISODE: An almost uncomfortable trip North of the border Brian and JF hint at current projects Talking Detroit debuts – The new rules regarding any pre-show coverage of debut cars – The risks involved with social media involvement vs keeping a new car "secret" until the show opens – JF's personal experience with leaked images and the Ridler judging rules – Having a rule put in place to ban tire-smoking donuts on the show floor because, well... JF Where passion rules the project Not building cars but being the steward to someone's dream The Kaiser build – Learning along the way – Innovating and persevering – Showing up at GNRS with a Kaiser – Spitting the pinion out of the car – Jeep Liberty headlamps, and where to use them French-Canadians and the art of cursing Beating the heck out of a Ridler-winning car The '55 Chrysler Phantom Wagon – Installing the wood headliner and clocking screws – Being an Jack-of-all-trades on a project out of necessity "Car Club Night" – Offering a chance to "lease the shoes of an Olympic athlete" – A group effort – Learning by doing "Rivision" – A team effort that bred priceless friendships and memories – When group participation trumps magazine coverage – The only Ridler winner to not be featured in Hot Rod Magazine or Street Rodder Magazine – The helping hand at Rad Rides – Being an ambassador to hot rodding – Pushing 150MPH in a Ridler-winning car – Post Barrett-Jackson Cup Hijinks – The Symphony of boost – The sound effect stylings of JF Doing donuts in Cobo Hall with Chip Foose in the passenger seat Scaring Jacques Villeneuve with a Buick Nature time with Alex: The Plecostomus Acadian VS Nova Drifting in the snow Re-return of the Aquarius wheel A well-endowed giraffe Eric's bad taste in wheels Canadian Ti
Fri, August 17, 2018
Making Old Men Polish Bolts: The Spirit of Hot Rodding
JF LAUNIER BREAKS THE RULES... AND HAS SOME PUT IN PLACE BECAUSE OF HIM Episode twenty-three heads to The Great White North and drags JF Launier back like a felled case of Labbatt Blue. JF is a long-time friend of Brian's, and brings his outstanding,
Fri, August 10, 2018
What's Kuchen with Kevin Oeste
KEVIN OESTE HOPS ABOARD THE MIGHTY ROUND SIX FREIGHT TRAIN Episode twenty-two of the podcast that shouldn't have brings it all next-level with the always awesome, always friendly and super-prolific Kevin Oeste of V8 Speed & Resto Shop , V8TV , and Muscle Car of the Week . And his team just broke 50,000 subscribers on their YouTube channel. If that doesn't make you feel lazy by comparison, he's also the face on many promo videos for aftermarket companies and the host of SEMA Central at the SEMA Show in Las Vegas. ...and he likes Buicks. And knows his kuchen. THINGS COVERED IN THIS EPISODE: A regrettable but damned funny innuendo-loaded intro Kevin's awesome media presence A terribly naughty pee joke Kevin and Brian film at SEMA – Round Six's Brian was the first guest on the V8 Radio podcast! Kevin's background in radio – How he and Mike Clark teamed-up on their podcast Superfans gone wild Early automotive influences Riding along with Dad in the Police cruiser The importance of engaging the youth in our hobby and industry – Moving beyond the car show to the movement; getting kids INTO cars literally The difference between ours and the next generation – The aspect of personal safety is pushing kids away from hot rodding Today's technology is magical Flat Earth theory... It'll make sense Engineering in the face of legislation Oeste's involvement in SEMA Working with Hot Rod Magazine The different missions of people at the SEMA Show – The recurring theme of the importance of interpersonal relationships Recognizing the value of your own business or production C0-hosting the SEMA Hall of Fame banquet with Jessi Combs – On inducting his hero Ed Pink "Don't screw this up, stupid" Giving thanks for being a friend "Old cars make new friends" Return of the Vantheon! – The $300 Dodge van Celebrating the success of your colleagues Brian plots his tattoo – Two sleeves and a back battle – The Star Wars front gets weird The Buick thing "The Sewer Sniffer" Skylark Muscle Car and Corvette Nationals All the latest goings-on in the V8 Speed and Resto Shop
Fri, August 10, 2018
What's Kuchen with Kevin Oeste
KEVIN OESTE HOPS ABOARD THE MIGHTY ROUND SIX FREIGHT TRAIN Episode twenty-two of the podcast that shouldn't have brings it all next-level with the always awesome, always friendly and super-prolific Kevin Oeste of V8 Speed & Resto Shop, V8TV,
Fri, August 03, 2018
Pillow Talk with Max Fish
MAX FISH DROPS IN ON THE PODCAST Episode twenty-one swims far into the mind of Max Fish, renaissance man. Known far and wide for his engineering and design prowess in the world of air suspension design (heck, he's writing THE book on the subject), he's also an accomplished builder, painter and artist in his own right. Hosting one of the most entertaining feeds on social media, he's the kind of guy who can tickle your brain in the most fascinating of ways, and we spent an evening talking all manner of things. THINGS COVERED IN THIS EPISODE: Neil DeGrasse Tyson and the 2-link Working as a "boutique-style" shop The genesis of The Air Suspension Design book – Humble beginnings with a Street Source and "Ask Max" – His column in MiniTruckin' (ties to former guest Mike Alexander ) – From notebook to complete book Inspiration from a tattoo sketch book Going from stock to "more stock" – A non-racing suspension book – Notes on where the book is at, completion-wise Teaching the engineering of suspension design Growing up as a "yard sale" of a kid – Dad had a long list of hobbies – Groomed to figure things out Escape From Anza... to Hemet On wanting to be a mechanic The difference between "stocker" and "stalker" explained Turning down a job on a race team to work at Target, and the reasons why Owning a shop – Partnerships, going it alone The joys of driving a slammed VW and living on a dirt road – The recurring theme of BMX to VW's and minis Timeless design – Working to honor history, yet redefine it Cadzilla as inspiration Design by the eye The importance of the eye over the tape measure Growing up next to Dick Dean's shop Friendship with Larry Watson Baffling the paint experts Getting into the arts – Painting as an escape from car overload – The Brewery in LA – Fine Art and Lowbrow – The joy of juxtaposing elements – Letting go and just creating for the sake of pushing the envelope Drop spindle talk The proliferation of the Pinto/Mustang II suspension Grade-8 nails (left-hand thread, naturally) The Dunning-Kruger effect and cognitive bias in 2-link people
Fri, August 03, 2018
Pillow Talk with Max Fish
MAX FISH DROPS IN ON THE PODCAST Episode twenty-one swims far into the mind of Max Fish, renaissance man. Known far and wide for his engineering and design prowess in the world of air suspension design (heck, he's writing THE book on the subject),
Fri, July 27, 2018
Sixteen Minutes to Solvang: Chip Foose
CHIP FOOSE HANGS OUT AND TALKS STORY WITH THE GEARHEADS Episode twenty goes all-out like a lacquer thinner-soaked rag on a fresh candy-painted Lamborghini Miura hood. The gearheads . Please excuse the slight technical glitches in this episode. We were plagued by sun spot, aliens or perhaps an alternate-dimensional rift. Chip Foose is the kind of a guy that defines what a hot rodder or car nut should be. He's experienced not only a rich family history in the industry, but having made his mark in virtually every aspect of it; a true renaissance man of the car world if there ever was one. We dig a bit deep, and find Chip to be not only the fascinating guest we had expected, but an unexpectedly open, passionate about his craft, and downright fun. THINGS COVERED IN THIS EPISODE: Humble beginnings – Working in his Dad's shop – Customizing bikes The AMT days – The Ala Kart Alex Tremulis inspiration Chip's bicycle fixation – The hunt for original, pre-teen Foose-built Huffy customs The bike caught in the midst of a legal battle Chip's design ends up in bike lore limbo Chip finds design at seven years of age – Chip's Dad Sam inspires him via his art – Expressing the Foose look at eleven years of age – "If you can't make it good, make it gaudy" Chip Foose quote memes gone wild Flush glass in a first-gen F-body – The first Pro-Touring car The Engle Brothers find a way into the episode Chip's new '67 C-10 project – Throwing ideas The Imposter Impala – The sheer number of hours invested will floor you – Chip and Brian compare Ridler Great-8 notes – Chip's keys to figuring proportion – Cutting up a brand-new Corvette – Airbag recall on a '65 Impala? – Making a hot rod from a brand-new car – From driver to Ridler winner – The best/worst two-inch square determines the winner On going 180-degrees from trendy Pillows in the backseat – It sounds like a Tim McGraw song for a reason Chip's involvement with the Progeria Research Foundation – Chip's sister Amy continues to inspire – The annual poker tournament/car show – John Stamos finds legend status among the Gearheads – Clinical trial progression Life lessons at ten years old – Learning to respect Chip's first car – Inadvertently bought his sister's car The GTi and San Marcos Pass The art of flipping cars Overhaulin' and over-workin' – Chip ruins the rendering game On having zero time to build a SEMA car – Six weeks of work forty hours, sleep eight, repeat – The joys of sleeping on your feet Swapping stories Chip's first da
Fri, July 27, 2018
Sixteen Minutes to Solvang: Chip Foose
CHIP FOOSE HANGS OUT AND TALKS STORY WITH THE GEARHEADS Episode twenty goes all-out like a lacquer thinner-soaked rag on a fresh candy-painted Lamborghini Miura hood. The gearheads . Please excuse the slight technical glitches in this episode.
Fri, July 20, 2018
Three and a Half Nuggets: Mike Alexander Brings the Sauce
MIKE ALEXANDER INSPIRES THE GEARHEADS Episode nineteen brings the inspiration and life lessons themes. Mike Alexander is the Gary Vaynerchuk of the automotive world. He's an example of inspiration, dedication and vision. A pioneer in the digital publishing world, he has moved seamlessly to manufacturing some of the most ground-breaking air ride systems. Living proof that hard work pays dividends, he opens up about design, school and instinct. Along the way, he lays out a master plan for making it through work, work, work. ...and then we discuss nipples. Like you'd expect any less. THINGS COVERED IN THIS EPISODE: An awkward discussion glides seamlessly into a podcast Starting with a letter to the Editor of MiniTruckin' to land that first gig – Renting a car a twenty one and holding tripods The humble beginnings of mini trucks and the lifestyle – "Second car poor" lifestyle The constant shifting of magazine ownership – The "perfect 24" The passion of building a brand Self employment for better or worse Shop names in hindsight – The value of projecting your business name on your future self Starting early has value (and impresses Brian) The digital revolution – The politics which prevented growth – Missing social media and more by twenty years Plotting a future, post-magazine life Rev'd Media, Slam'd Mag and a talent pool of incredible proportions – Deliberate quality standards – When Jalopnik doesn't compare – The coffee table book of digital The value and non-value of formal education Knowing what to apply and when – Following your interests; pursuing what you love Max and Brian's metaphysical discussions serve as an example NEVER giving up Bring passionate enough to get mad at your passions Balancing character with nervous energy "Smile at hardship" – Working with struggle to forge character – Fight over flight every time A VERY NON AIR-FRIENDLY OFF-COLOR JOKE WAS REMOVED HERE FOR YOUR SAFETY. The podcast is not sponsored by a condom company An absolutely terrifying Michael Jackson joke – Eric made us keep it The small business-as-child metaphor Creative brain equals no sleep The value of compartmentalization Koala bears and chlamydia – Dancing in a golden shower of bear urine SEMA insight from every angle – Building a vehicle and the challenges presented – Cost vs ROI of booth space Sponsorships revisited – Representing your sponsor product's company through your creation – Responsibility weighs heavy – The importance of ef
Fri, July 20, 2018
Three and a Half Nuggets: Mike Alexander Brings the Sauce
MIKE ALEXANDER INSPIRES THE GEARHEADS Episode nineteen brings the inspiration and life lessons themes. Mike Alexander is the Gary Vaynerchuk of the automotive world. He's an example of inspiration, dedication and vision.
Fri, July 13, 2018
The Strange thing is... Tim Strange Stops By
TIM STRANGE SITS DOWN WITH THE GEARHEADS Episode eighteen. That's a milestone, right? If we were a female pop star from the 1990's, the creepers would be posting weird things over on social media about how they'd have a chance with us now.... But instead, it's us who get the chance to sit and talk with good friend and hot rod industry ambassador extraordinaire, Tim Strange. We talk custom car legends in their underwear, the darker side of TV stardom, hot rod cruises and fat camps, goat sex changes and the dangers of "buffet syndrome." Let's see your podcast do this. THINGS COVERED IN THIS EPISODE: A Marvel-style intro A poor, sad, nearly pathetic flat boob joke at the expense of 4-H Getting started in the hot rod hobby – Tim's first car, a '55 Chevy that he bought at eight years old – His Dad's custom bikes and wild '57 Chevy Always knew he wanted to build hot rods – Had his business name picked out in sixth grade The benefits of being raised to work hard – Farm life Early days working on Corvettes, both concours and custom – Learned to paint 'flake by fixing crashed custom bass boats Tim's sideline as a Christmas tree flocker Brian and Tim's shared history The mentoring theme continues – Learning marketing and the value of am working relationship with manufacturers with Rocky Roberstson – Staying true not only to your word, but to those who give you a hand Advice to young builders on the topic of sponsors – Nothing is free – Do what you promise – It goes well beyond money – "You dance with who got you there." – Bobby Alloway On burning bridges with sponsorships – All companies network How social media has changed the sponsor/builder relationship – A whole new requirement and dynamic vs the old days of simple magazine coverage – Instagram VS Facebook – Number of views, social reach, YouTube views On the changing of goals in the industry – Getting in magazines VS winning awards Hot Rod fat camp On automotive television – "Search and Restore" On the business of building hot rods – "Buffet syndrome" On building cars for enjoyment VS judges The great goat sex change Appreciation for all cars – What we're used to VS what we can do Darryl Starbird's underwear The Hot Rod Cruise The superpower that is insomnia Brian expresses his thanks to Tim for his help – Tim's talking hands destroy an iPad at SEMA New product judging at the SEMA Show The Nashville-to-Vegas "Strange Road Trip to SEMA"
Fri, July 13, 2018
The Strange thing is... Tim Strange Stops By
TIM STRANGE SITS DOWN WITH THE GEARHEADS Episode eighteen. That's a milestone, right? If we were a female pop star from the 1990's, the creepers would be posting weird things over on social media about how they'd have a chance with us now....
Fri, July 06, 2018
Life-Size Aunt Jemima: Song of the Hell's Engles
THE ENGLE BROTHERS HANG OUT AND WHATNOT On episode seventeen, David and Greg Engle of Engle Brothers Fabrication take time from their busy Instagram posting to hang out with the Gearheads and talk cars, life, family, being freakishly tall, and not surprisingly, human anatomy. THINGS COVERED IN THIS EPISODE: A bizarre intro When things go off of the rails Getting started in the hot rod hobby Family history with the Road Kings – Early chrome moly dragster chassis construction Drag Week and Greg's connection to it Podcast Superhost, "Ludicrous Misnomer" Greg reveals that he doesn't like LS engines Dave's 8HP blown Olds Alex's dog falls asleep Putting soul into a project – The importance of making things look timeless – Beauty is in the details Shots fired on Greg's wagon Inspiration and where you find it – Art in every aspect of a build – Making the most of what's on hand The Danny D -painted kandy gasser stroller The V8 go kart! Greg's old tool finds – A monster bred of necessity – Built to last – Estate sales and Craig's list – Barry Manilow's third mention on the podcast, but the first to evade editing – The value of purchasing used or old/antique tools when starting out Being mentored by Rob Ida – Picking up things from everyone you admire How Brad's flip-phone Compu-Serve app failed him again Return of the hot rod musical Tres Miserables Dave questions why we had the brothers on – Brian hypothesizes that it's the booze again – Alex argues that it was a lost bet – It all boils down to mutual enabling The value of being unafraid of failure Seeking out a mentor/guide
Fri, July 06, 2018
Life-Size Aunt Jemima: Song of the Hell's Engles
THE ENGLE BROTHERS HANG OUT AND WHATNOT On episode seventeen, David and Greg Engle of Engle Brothers Fabrication take time from their busy Instagram posting to hang out with the Gearheads and talk cars, life, family, being freakishly tall,
Fri, June 29, 2018
Film Friday Season of the Kitsch
EPISODE SIXTEEN: IT AIN'T SO SWEET, LOOKING BACK ON IT The Gearheads attempt to enjoy the first "Film Friday" episode, and in honor of this being the first week of Summer, made a grave error. We watched "Corvette Summer." Three of the Gearheads rented it on Amazon; one went right on ahead and purchased it on iTunes. Buyer's remorse? You'll have to listen to the episode to see just how deep that rabbit hole goes. There's nostalgia, kitsch, and, well, this movie. It makes you wonder if they had stuck with the title The Hot One , or its working title Stingray (which was registered for another cruddy film that also had a Corvette). IT'S AN INTERACTIVE EPISODE – HOW THIS ALL WORKS You can join the Gearheads, and watch along with us! Simply grab a copy of the movie, cue that bad boy up as described in the podcast (get your copy of the movie to the ten-second mark, and let 'er rip when we do!), and enjoy. We'd suggest having a beverage handy, and leaving your expectations outdoors. If you haven't seen this one in a while, you may have some preconceived notions about what it's like. So did we. Note the lack of spoilers. Or far-too-easy Star Wars references. We will say that, coincidentally enough, one of the stars of this film went on to play a part in Steven J. Cannell's TV series Stingray . We know, right?! Full notes on the website this week. Well, except for Brad. There's just more than should probably go here, or that we should try to make fit. Enjoy the movie. Or us. Or have someone run the vacuum. Your call, really. The Round Six Podcast makes no claim of ownership and only uses any footage, sound clips or cited examples from the film for purposes of commentary, criticism and education under Fair Use. The opinions expressed are those of the persons writing them, and do not necessarily reflect the views of the Round Six Podcast as a whole, and are presented as entertainment or satirical criticism only.
Fri, June 29, 2018
Film Friday Season of the Kitsch
EPISODE SIXTEEN: IT AIN'T SO SWEET, LOOKING BACK ON IT The Gearheads attempt to enjoy the first "Film Friday" episode, and in honor of this being the first week of Summer, made a grave error. We watched "Corvette Summer."
Fri, June 22, 2018
A High Bolt-age Ride in the Fastener Lane With Bob Florine
EPISODE FIFTEEN. BOB FLORINE OF ARP TALKS FASTENER ENGINEERING AND SALES MASTERY. The Gearheads host the very gracious and incredibly fun Bob Florine of ARP. We talk careers, the value of learning a business from the ground-up, working as a traveling salesman and engineering. To say that there is a TON of value in this episode would be an understatement. If you've ever wanted to learn the in's and out's of fastener engineering and how to work your way to the top, then this is your episode. Suffice to say, Bob is the guy you want riding shotgun the next time you run to the hardware store to match up those bolts for your Kruupenschornen IKEA chair. If you ignore the incredible free class on fastener engineering, the amazing advice on moving through the ranks of company and even the great example of how to treat others, please take this away from the episode: Bob is a guy who is excited about, and clearly loves his job. The same one he has held for over forty years . Consider that for a moment. This episode hands you the secret to a happy life and career. Boom. The guys dive deep into the why's and how's of bolts, and then get carried away talking about Bob's project cars, and a little Round Six connection to one via our own Brad. THINGS COVERED IN THIS EPISODE: The value of starting out on the ground floor How a quality product and diverse line can put a company far ahead in all aspects A brief history of incredible sustained growth Competition in the marketplace Quality and engineering From go-karts to space – Everything from food lines to oil rigs to aerospace – Much of ARP's work comes from racers having day jobs and suggesting the product to their employers Dealing with counterfeit parts in the marketplace The incredible advances in race technology Brian launches "Team Pushbroom," the only F1 race team that exclusively uses counterfeit parts Smokey Yunick John Paul Stapp and the rocket sled The wealth of engineering information available in just the first twenty pages of the ARP catalog Threads are the weakest link in a fastener Torque wrench versus stretch gauge – Torque is variable, stretch is empirical – Yield – Elastic versus plastic How fasteners are essentially springs Designing fasteners for turbocharged applications Exploring the re-use of "torque-to-yield" fasteners Explaining thread diameter – Rolling/extruding thread Hot-heading versus cold-heading Marketing – Sponsorship versus paid placement – The value of personal relationships over sales dollars Moving to California on his own at seventeen Starting in sales Bob's first hot rod, a cafe racer-style Honda A '68 Satellite with a 383 The $1500 4
Fri, June 22, 2018
A High Bolt-age Ride in the Fastener Lane With Bob Florine
EPISODE FIFTEEN. BOB FLORINE OF ARP TALKS FASTENER ENGINEERING AND SALES MASTERY. The Gearheads host the very gracious and incredibly fun Bob Florine of ARP. We talk careers, the value of learning a business from the ground-up,
Fri, June 15, 2018
Decorated With Work: Rob Ida Stops By
EPISODE FOURTEEN. ROB IDA, TUCKERS, HOT RODS AND RACING ON THE BEACH. The Gearheads host the incredibly skilled and prolific Rob Ida for an evening of incredible coincidences, hot rods, legendary friends and more. Rob shares his hot rodding history, his perspective on cars competing for awards, and being fortunate to have been able to work on cars that inspire an emotional connection, versus simply being a means to an end in and of themselves. Being a small shop, it's simply about the car, which is why you won't visit the shop and see a ton of decoration. Ida's shop is, as he describes it, "decorated with work." And that is a fine description of his incredible career, as well. We think you're going to enjoy the heck out of this episode, and cannot wait to have Rob back again soon. You can learn even more about Rob and his team on their website: www.robidaconcepts.com THINGS COVERED IN THIS EPISODE: The stakes are high with a new game show The Race of Gentlemen – eBay helmets Gene Winfield – Finishing projects of Gene's from the 1960's – Metalshaping classes – Laying down on of his world-famous fade paint jobs – The incredible work ethic of a 90 year old icon Building cars as art, not a competitive device Having the opportunity to purchase Gene's old '32 "Decorated with work;" discussing the lack of flashy decor in the shop – Emotional attachment to a project versus over-processing a build – The recurrence of trends – A love of engineering and design and balancing the two Rob's love for Willys, Tucker and Porsches A family history of fast cars – His Dad's supercharged, 10-second 427-powered street '32 – From horses to the Hemi Healey Building the Tucker Torpedo – Solving the problem of the center-mount driver seat – Using Arduino and SolidWorks Pebble Beach concours-level Tucker #44 restoration – Removing 200-lbs of factory lead Using the cars to go beyond, in terms of charity and inspiration Rescuing the original Tucker blueprints – Saved from a landfill because of the ink! – Discovering original correspondence from Rob's grandfather and Tucker The challenge of working on/restoring Tucker automobiles The 589ci Tucker flat six – Simplicity means less parts to break The incredible engineering of Tucker The value of having good people in your life and taking the time to recognize and appreciate them
Fri, June 15, 2018
Decorated With Work: Rob Ida Stops By
EPISODE FOURTEEN. ROB IDA, TUCKERS, HOT RODS AND RACING ON THE BEACH. The Gearheads host the incredibly skilled and prolific Rob Ida for an evening of incredible coincidences, hot rods, legendary friends and more. Rob shares his hot rodding history,
loading...